Joan Croft Halt railway station

Joan Croft Halt railway station was a small halt on the East Coast Main Line (ECML) situated by a level crossing at Joan Croft Junction in South Yorkshire, England. The junction gives access from the ECML to the Skellow line of the West Riding and Grimsby Railway and eventually to Hull, Immingham and Grimsby Docks.

Joan Croft Halt
Joan Croft level crossing with former station buildings to the left (2007)
Location
PlaceThorpe in Balne
AreaDoncaster
Coordinates53.58787°N 1.12189°W / 53.58787; -1.12189
Grid referenceSE582105
Operations
Pre-groupingNorth Eastern Railway (UK)
Platforms2
History
1920opened
1950sclosed
Disused railway stations in the United Kingdom
Closed railway stations in Britain
A B C D–F G H–J K–L M–O P–R S T–V W–Z

History

The halt consisted of two flanking platforms to the south of the level crossing, with brick-built station buildings on the York-bound side. These buildings still stand in private use. The station was set in the countryside, with just a few cottages situated either side at some distance.

The station was not shown in railway timetables as it was only for the use of platelayers and crossing keepers (and their families) to enable them to get into, and out of, Doncaster for weekend shopping.[1]

The station opened c.1920 and closed in the 1950s.

In May 2011, Network Rail applied to the Infrastructure Planning Commission for permission to construct a North Doncaster chord to link two lines, the Askern line and the Skellow line, with a viaduct passing above Joan Croft junction. The aim of the project was to eliminate the need to use the ECML for slow-moving, westbound bulk freight trains from the Humber ports, in particular, coal from Immingham to Ferrybridge power station. As part of the proposed works, the Joan Croft level crossing was closed and replaced by a road bridge. Closing the level crossing allowed engineers to lower the overhead wires on the ECML (because the wires no longer had to be higher than the highest road vehicle plus a safety margin), thus allowing the new railway viaduct to be constructed at a lower level.[2] The new 2.0-mile (3.2 km) chord opened to traffic on 1 June 2014.[3]

gollark: Define them as regexes for maximum !!FUN!!.
gollark: `load`?
gollark: Although adding eval for most stuff *may* make it run slow.
gollark: C programmers will love it.
gollark: Overridable builtins. What could go wrong?

References

  1. Hoole, Ken (1985). Railway stations of the North East. Newton Abbot: David & Charles. p. 10. ISBN 0-7153-8527-5.
  2. "The Network Rail (North Doncaster Chord) Order - Description of the Development" (PDF). Network Rail. May 2011. Archived (PDF) from the original on 1 October 2012. Retrieved 4 August 2011.
  3. "Doncaster North Chord grade separation completed". Railway Gazette. DVV Media. 3 June 2014. Archived from the original on 2 February 2017. Retrieved 24 January 2017.
  • Butt, R. V. J. (1995). The Directory of Railway Stations: details every public and private passenger station, halt, platform and stopping place, past and present (1st ed.). Sparkford: Patrick Stephens Ltd. ISBN 978-1-85260-508-7. OCLC 60251199.
Preceding station Historical railways Following station
Moss
Line open, station closed
  North Eastern Railway
East Coast Main Line
  Arksey
Line open, station closed


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.