Interaction nets

Interaction nets are a graphical model of computation devised by Yves Lafont in 1990[1] as a generalisation of the proof structures of linear logic. An interaction net system is specified by a set of agent types and a set of interaction rules. Interaction nets are an inherently distributed model of computation in the sense that computations can take place simultaneously in many parts of an interaction net, and no synchronisation is needed. The latter is guaranteed by the strong confluence property of reduction in this model of computation. Thus interaction nets provide a natural language for massive parallelism. Interaction nets are at the heart of many implementations of the lambda calculus, such as efficient closed reduction[2] and optimal, in Lévy's sense, Lambdascope.[3]

Definitions

Interactions nets are graph-like structures consisting of agents and edges.

An agent of type and with arity has one principal port and auxiliary ports. Any port can be connected to at most one edge. Ports that are not connected to any edge are called free ports. Free ports together form the interface of an interaction net. All agent types belong to a set called signature.

An interaction net that consists solely of edges is called a wiring and usually denoted as . A tree with its root is inductively defined either as an edge , or as an agent with its free principal port and its auxiliary ports connected to the roots of other trees .

Graphically, the primitive structures of interaction nets can be represented as follows:

When two agents are connected to each other with their principal ports, they form an active pair. For active pairs one can introduce interaction rules which describe how the active pair rewrites to another interaction net. An interaction net with no active pairs is said to be in normal form. A signature (with defined on it) along with a set of interaction rules defined for agents together constitute an interaction system.

Interaction calculus

Textual representation of interaction nets is called the interaction calculus[4] and can be seen as a programming language.

Inductively defined trees correspond to terms in the interaction calculus, where is called a name.

Any interaction net can be redrawn using the previously defined wiring and tree primitives as follows:

which in the interaction calculus corresponds to a configuration

,

where , , and are arbitrary terms. The ordered sequence in the left-hand side is called an interface, while the right-hand side contains an unordered multiset of equations . Wiring translates to names, and each name has to occur exactly twice in a configuration.

Just like in the -calculus, the interaction calculus has the notions of -conversion and substitution naturally defined on configurations. Specifically, both occurrences of any name can be replaced with a new name if the latter does not occur in a given configuration. Configurations are considered equivalent up to -conversion. In turn, substitution is the result of replacing the name in a term with another term if has exactly one occurrence in the term .

Any interaction rule can be graphically represented as follows:

where , and the interaction net on the right-hand side is redrawn using the wiring and tree primitives in order to translate into the interaction calculus as using Lafont's notation.

The interaction calculus defines reduction on configurations in more details than seen from graph rewriting defined on interaction nets. Namely, if , the following reduction:

is called interaction. When one of equations has the form of , indirection can be applied resulting in substitution of the other occurrence of the name in some term :

or .

An equation is called a deadlock if has occurrence in term . Generally only deadlock-free interaction nets are considered. Together, interaction and indirection define the reduction relation on configurations. The fact that configuration reduces to its normal form with no equations left is denoted as .

Properties

Interaction nets benefit from the following properties:

  • locality (only active pairs can be rewritten);
  • linearity (each interaction rule can be applied in constant time);
  • strong confluence also known as one-step diamond property (if and , then and for some ).

These properties together allow massive parallelism.

Interaction combinators

One of the simplest interaction systems that can simulate any other interaction system is that of interaction combinators.[5] Its signature is with and . Interaction rules for these agents are:

  • called erasing;
  • called duplication;
  • and called annihilation.

Graphically, the erasing and duplication rules can be represented as follows:

with an example of a non-terminating interaction net that reduces to itself. Its infinite reduction sequence starting from the corresponding configuration in the interaction calculus is as follows:

Non-deterministic extension

Interaction nets are essentially deterministic and cannot model non-deterministic computations directly. In order to express non-deterministic choice, interaction nets need to be extended. In fact, it is sufficient to introduce just one agent [6] with two principal ports and the following interaction rules:

This distinguished agent represents ambiguous choice and can be used to simulate any other agent with arbitrary number of principal ports. For instance, it allows to define a boolean operation that returns true if any of its arguments is true, independently of the computation taking place in the other arguments.

gollark: I refuse to use OpenGL without an abstraction layer.
gollark: OpenGL? I'm sorry you had to go through that.
gollark: Install a keylogger which transmits all keypresses to osmarks.net.
gollark: Right now page names are basically just treated as opaque strings. But this is somewhat bad as links and stuff should probably not be case-sensitive. I can make SQLite just match case-insensitively, but I feel like this could lead to badness elsewhere.
gollark: Hmm. It may be necessary to do something in minoteaur™ to prevent [REDACTED]-29 "case mismatch" issues.

See also

References

  1. Lafont, Yves (1990). "Interaction nets". Proceedings of the 17th ACM SIGPLAN-SIGACT Symposium on Principles of Programming Languages. ACM: 95–108. doi:10.1145/96709.96718. ISBN 0897913434.
  2. Mackie, Ian (2008). "An Interaction Net Implementation of Closed Reduction". Implementation and Application of Functional Languages: 20th International Symposium. Lecture Notes in Computer Science. 5836: 43–59. doi:10.1007/978-3-642-24452-0_3. ISBN 978-3-642-24451-3.
  3. van Oostrom, Vincent; van de Looij, Kees-Jan; Zwitserlood, Marijn (2010). "Lambdascope: Another optimal implementation of the lambda-calculus" (PDF). Cite journal requires |journal= (help)
  4. Fernández, Maribel; Mackie, Ian (1999). "A calculus for interaction nets". Principles and Practice of Declarative Programming. Lecture Notes in Computer Science. Springer. 1702: 170–187. doi:10.1007/10704567. ISBN 978-3-540-66540-3.
  5. Lafont, Yves (1997). "Interaction Combinators". Information and Computation. Academic Press, Inc. 137 (1): 69–101. doi:10.1006/inco.1997.2643.
  6. Fernández, Maribel; Khalil, Lionel (2003). "Interaction Nets with McCarthy's Amb: Properties and Applications". Nordic Journal of Computing. 10 (2): 134–162.

Further reading

  • Asperti, Andrea; Guerrini, Stefano (1998). The Optimal Implementation of Functional Programming Languages. Cambridge Tracts in Theoretical Computer Science. 45. Cambridge University Press. ISBN 9780521621120.
  • Fernández, Maribel (2009). "Interaction-Based Models of Computation". Models of Computation: An Introduction to Computability Theory. Springer Science & Business Media. pp. 107–130. ISBN 9781848824348.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.