Ian Gibson (professor)

Ian Gibson (born April 7, 1963) is a Professor of Design Engineering at the University of Twente. Gibson was selected as the scientific director of Fraunhofer Project Center at the University of Twente[1][2] and is a recipient of lifetime achievement award, the Freeform and Additive Manufacturing Award.[3][4] His main areas of research are in at the additive manufacturing, multi-material systems, micro-RP, Rapid Prototyping, Medical Modelling and tissue engineering.[5]

Ian Gibson
Ian Gibson in Singapore, 2013
Born (1963-04-07) April 7, 1963
Falkirk, Stirlingshire, Scotland
NationalityBritish
Alma materUniversity of Hull
AwardsFreeform and Additive Manufacturing (FAME) Award
Scientific career
FieldsAdditive Manufacturing, Medical Modelling, Rapid Prototyping, 3D Printing, Industrial Design
InstitutionsUniversity of Twente

Gibson is also an editor at the Rapid Prototyping Journal and a visiting professor at Deakin University.[6] He has co-authored over 240 articles in peer-reviewed journals and conferences.[7]

Education

Gibson completed schooling from the Wick High School in 1979. He first completed a B.S. in the Electronic Eng in 1984 from the University of Hull in Hull, England and then received a Ph.D. in 1989 in Robotics from the University of Hull.

Career and research

Gibson began his career as an automation and robotics lecturer at the University of Nottingham. From 1994 to 2005, he was a professor at the University of Hong Kong. In 2005, Gibson moved to the National University of Singapore where he worked as an associate professor for 8 years. In 2014, Gibson joined as the professor of Industrial Design at the Deakin University in Geelong, Australia and there he initiated the university’s ‘flagship’ Centre for Advanced Design and Engineering Training (CADET). In 2018, he joined University of Twente. He is also the co-editor of the Rapid Prototyping Journal and co-founder of the Global Alliance of Rapid Prototyping Associations.[8]

Gibson is the recipient of the FAME award for his recognition of his lifetime contribution to 3D printing.[9][10][11] He gained recognition for his work on the prosthetic device for total joint replacement in small joint arthroplasty.[12] He has authored book Additive Manufacturing Technologies with David Rosen, Brent Stucker, which is used as a text in the universities.

Selected publications
  • Gibson, Ian; Srinath, Aniruddha (2015-01-01). "Simplifying Medical Additive Manufacturing: Making the Surgeon the Designer". Procedia Technology. 20: 237–242. doi:10.1016/j.protcy.2015.07.038. ISSN 2212-0173.
  • Gibson, Ian; Rosen, David; Stucker, Brent (2014-11-26). Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing. Springer. ISBN 9781493921133.
  • Gibson, Ian (2006-06-14). Advanced Manufacturing Technology for Medical Applications: Reverse Engineering, Software Conversion and Rapid Prototyping. John Wiley & Sons. ISBN 9780470032848.
  • "Ian Gibson-Software Solutions for Rapid Prototyping-Wiley (2002) | Computer Aided Design | Domain Name". Scribd. Retrieved 2018-12-07.
  • Gibson, Ian; Shi, Dongping (1997). "Material properties and fabrication parameters in selective laser sintering process". Rapid Prototyping Journal. 3 (4): 129–136. doi:10.1108/13552549710191836.
  • Campbell, Ian; Bourell, David; Gibson, Ian (2012). "Additive manufacturing: rapid prototyping comes of age". Rapid Prototyping Journal. 18 (4): 255–258. doi:10.1108/13552541211231563.
  • Thompson, Mary Kathryn; Moroni, Giovanni; Vaneker, Tom; Fadel, Georges; Campbell, R. Ian; Gibson, Ian; Bernard, Alain; Schulz, Joachim; Graf, Patricia; Ahuja, Bhrigu; Martina, Filomeno (2016-01-01). "Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints". CIRP Annals. 65 (2): 737–760. doi:10.1016/j.cirp.2016.05.004. hdl:1826/10133. ISSN 0007-8506.
  • Gibson, I.; Cheung, L.K.; Chow, S.P.; Cheung, W.L.; Beh, S.L.; Savalani, M.; Lee, S.H. (2006). "The use of rapid prototyping to assist medical applications". Rapid Prototyping Journal. 12: 53–58. doi:10.1108/13552540610637273.
  • Ho, H.C.H; Gibson, I.; Cheung, W.L (1999-05-19). "Effects of energy density on morphology and properties of selective laser sintered polycarbonate". Journal of Materials Processing Technology. 89-90: 204–210. doi:10.1016/S0924-0136(99)00007-2. ISSN 0924-0136.
  • Arafat, M. Tarik; Lam, Christopher X.F.; Ekaputra, Andrew K.; Wong, Siew Yee; Li, Xu; Gibson, Ian (2011-02-01). "Biomimetic composite coating on rapid prototyped scaffolds for bone tissue engineering". Acta Biomaterialia. 7 (2): 809–820. doi:10.1016/j.actbio.2010.09.010. ISSN 1742-7061. PMID 20849985.
  • Gibson, Ian; Kvan, Thomas; Wai Ming, Ling (2002). "Rapid prototyping for architectural models". Rapid Prototyping Journal. 8 (2): 91–95. doi:10.1108/13552540210420961.
  • Ho, Henry Chung Hong; Cheung, Wai Lam; Gibson, Ian (2003). "Morphology and properties of selective laser sintered bisphenol a polycarbonate". Industrial & Engineering Chemistry Research. 42 (9): 1850–1862. doi:10.1021/ie0206352.
  • Dickens, P. M.; Pridham, M. S.; Cobb, R. C.; Gibson, I.; Dixon, G. (1992). "Rapid Prototyping Using 3-D Welding". University of Texas at Austin. doi:10.15781/T2ZW1990V. Cite journal requires |journal= (help)
  • Ho, H.C.H.; Cheung, W.L.; Gibson, I. (2002). "Effects of graphite powder on the laser sintering behaviour of polycarbonate". Rapid Prototyping Journal. 8 (4): 233–242. doi:10.1108/13552540210441148.
  • Ma, S.; Gibson, I.; Balaji, G.; Hu, Q.J. (2007-10-01). "Development of epoxy matrix composites for rapid tooling applications". Journal of Materials Processing Technology. 192-193: 75–82. doi:10.1016/j.jmatprotec.2007.04.086. ISSN 0924-0136.
  • Gibson, Ian (2006). "Rapid prototyping: from product development to medicine and beyond". Virtual and Physical Prototyping. 1: 31–42. doi:10.1080/17452750500271298.
  • Gibson, Ian; Shi, Dongping (1997). "Material properties and fabrication parameters in selective laser sintering process". Rapid Prototyping Journal. 3 (4): 129–136. doi:10.1108/13552549710191836.
  • Gibson, Ian (2006). "Rapid prototyping: from product development to medicine and beyond". Virtual and Physical Prototyping. 1: 31–42. doi:10.1080/17452750500271298.
  • Ng, C. C.; Savalani, M. M.; Man, H. C.; Gibson, I. (2010). "Layer manufacturing of magnesium and its alloy structures for future applications". Virtual and Physical Prototyping. 5: 13–19. doi:10.1080/17452751003718629. hdl:10397/29094.
  • Tarik Arafat, M.; Gibson, Ian; Li, Xu (2014). "EmeraldInsight". Rapid Prototyping Journal. 20: 13–26. doi:10.1108/rpj-03-2012-0023.
  • Gibson, Ian (2005). "Rapid Prototyping: A Tool for Product Development". Computer-Aided Design and Applications. 2 (6): 785–793. doi:10.1080/16864360.2005.10738342.
  • "Specification of VRML in color rapid prototyping" (PDF). pdfs.semanticscholar.org. Retrieved 2018-12-07.
gollark: Yes, but if a tablet is available...
gollark: Those are no longer considered very private.
gollark: Put your swap on pingFS to download more RAM!
gollark: Then get cheap ones?
gollark: A træfik-type config thing for nginx? I may use this.

References
  1. "Fraunhofer has to be successful". www.utoday.nl. Retrieved 2018-12-07.
  2. van der Veen, Wiebe (4 July 2018). "Prof Ian Gibson appointed scientific director Fraunhofer Project Center". Universiteit of Twente. Retrieved 2018-12-07.
  3. "International accolade for Deakin pioneer in 3D printing". www.deakin.edu.au. 10 October 2018. Retrieved 2018-12-07.
  4. "Australian Academic Wins Prestigious Award for Contributions to 3D Printing". All3DP. 2017-08-14. Retrieved 2018-12-07.
  5. "Frontiers of 3D printing and additive manufacturing explained". www.deakin.edu.au. Retrieved 2018-12-07.
  6. "Prof. Ian Gibson – GCMM 2018". www.gcmm2018.org. Retrieved 2018-12-07.
  7. "Ian Gibson". Google Scholar. Retrieved 2018-12-07.
  8. Keynotes. Strategies for the Third Industrial Revolution – December 3-4, 2015 | Mumbai. Inside 3D Printing Conference and Expo. Retrieved 2018-12-07.
  9. "Award for 3D printing pioneer". Materials Today. Retrieved 2018-12-07.
  10. "additive manufacturing technologies". Australian Manufacturing. Retrieved 2018-12-07.
  11. "Professor Ian Gibson receives international FAME award for achievements in Additive Manufacturing research". Metal Additive Manufacturing. 2017-08-25. Retrieved 2018-12-07.
  12. WO 2004096101A1, "Prosthetic device for total joint replacement in small joint arthroplasty", issued 2004-03-24
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.