Hydraulic seal

A hydraulic seal is a relatively soft, non-metallic ring, captured in a groove or fixed in a combination of rings, forming a seal assembly, to block or separate fluid in reciprocating motion applications. Hydraulic seals are vital in machinery. Their use is critical in providing a way for fluid power to be converted to linear motion.

Materials

Hydraulic seals can be made from a variety of materials such as polyurethane, rubber or PTFE.[1] The type of material is determined by the specific operating conditions or limits due to fluid type, pressure, fluid chemical compatibility or temperature.[2]

Other materials to consider depending on your application are Viton, NBR, EPDM, and filled PTFE.[3]

Static

A static hydraulic seal is located in a groove and sees no movement - only sealing within its confined space, acting like a gasket. To achieve this the gasket should be under pressure. The pressure is applied by tightening of the bolts.

Dynamic

A type of dynamic hydraulic seal called a rod seal is exposed to movement on its inner diameter along the shaft or rod of a hydraulic cylinder. A type of dynamic hydraulic seal called a piston seal is exposed to movement on its outer diameter along the tube or bore of a hydraulic cylinder.

gollark: 1/60Hz.
gollark: I'm just continuously making fora.
gollark: At all times.
gollark: Don't we all?
gollark: You will be, yes, when the bees approach.

References
  1. "Basics of Hydraulic Seals - Seal Materials". HydraulicFacts.com. The Lubrizol Corporation. 28 February 2013. Archived from the original on 2013-05-03. Retrieved 23 August 2013.
  2. "PTFE Packing Materials". ptfepacking.net. American Seal and Packing. 28 February 2015. Retrieved 16 Feb 2015.
  3. "Hydraulic Seals". Allied Metrics Seals & Fasteners, Inc. Retrieved 2019-04-05.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.