Hoek–Brown failure criterion

The Hoek–Brown failure criterion is an empirical stress surface that is used in rock mechanics to predict the failure of rock.[1][2] The original version of the Hoek–Brown criterion was developed by Evert Hoek and E. T. Brown in 1980 for the design of underground excavations.[3] In 1988, the criterion was extended for applicability to slope stability and surface excavation problems.[4] An update of the criterion was presented in 2002 that included improvements in the correlation between the model parameters and the geological strength index (GSI).[5]

The basic idea of the Hoek–Brown criterion was to start with the properties intact rock and to add factors to reduce those properties because of the existence of joints in the rock.[4] Although a similar criterion for concrete had been developed in 1936, the significant tool that the Hoek–Brown criterion gave design engineers was a quantification of the relation between the stress state and Bieniawski's rock mass rating (RMR).[6] The Hoek–Brown failure criterion is used widely in mining engineering design.

The original Hoek–Brown criterion

The Hoek–Brown criterion has the form[2]

where is the effective maximum principal stress, is the effective minimum principal stress, and are materials constants. In terms of the mean normal stress () and maximum shear stress ()

where

We can convert the above relation into a form similar to the Mohr–Coulomb failure criterion by solving for to get

The material constants are related to the unconfined compressive () and tensile strengths () by[2]

Symmetry issue

If we set in the above equation, we get the pure shear Hoek–Brown criterion:

The two values of are unsymmetric with respect to the axis in the -plane. This feature of the Hoek–Brown criterion appears unphysical[2] and care must be exercised when using this criterion in numerical simulations.

See also

References

  1. Hoek E.; Brown E.T. (1980). Underground Excavations in Rock. London: Institution of Mining and Metallurgy.
  2. Pariseau, W. G. (2009). Design Analysis in Rock Mechanics. Taylor and Francis. p. 499.
  3. Hoek E.; Brown E.T. (1980). "Empirical strength criterion for rock masses". Journal of the Geotechnical Engineering Division: 1013–1025.
  4. Hoek, E. and Brown (1988). "The Hoek-Brown failure criterion - a 1988 update" (PDF). Proc. 15th Canadian Rock Mech. Symp.: 31–38.
  5. Hoek E, Carranza-Torres CT, Corkum B (2002). "Hoek-Brown failure criterion-2002 edition" (PDF). Proceedings of the Fifth North American Rock Mechanics Symposium. 1: 267–273.
  6. Bieniawski, Z. T. (1976). Z. T. Bieniawski (ed.). "Rock mass classification in rock engineering". Proc. Symposium on Exploration for Rock Engineering. Balkema, Cape Town: 97–106.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.