Hörstel station

Hörstel
Hörstel
	Through station
	Hörstel railway station
Location	Hörstel, North Rhine-Westphalia; Germany
Coordinates	52°17′45″N 7°35′32″E
Line(s)	Löhne–Rheine railway;
Platforms	2
Other information
Station code	n/a
Category	5
Website	www.bahnhof.de

Hörstel is a railway station located in Hörstel, Germany. The station is located on the Löhne–Rheine line. The train services are operated by WestfalenBahn.

Train services

The station is served by the following service(s):[1]

Regional services RE 60 Rheine - Osnabrück - Minden - Hanover - Braunschweig
Regional services RB 61 Bad Bentheim - Rheine - Osnabrück - Herford - Bielefeld

Preceding station		WestfalenBahn		Following station
Rheine Hbf Terminus		RE 60 Ems-Leine-Express		Ibbenbüren-Esch toward Braunschweig Hbf
Rheine Hbf toward Hengelo		RB 61 Wiehengebirgs-Bahn		Ibbenbüren-Esch toward Bielefeld Hbf

gollark: All numbers are two's complement because bee you.

gollark: The rest of the instruction consists of variable-width (for fun) target specifiers. The first N target specifiers in an operation are used as destinations and the remaining ones as sources. N varies per opcode. They can be of the form `000DDD` (pop/push from/to stack index DDD), `001EEE` (peek stack index EEE if source, if destination then push onto EEE if it is empty), `010FFFFFFFF` (8-bit immediate value FFFFFFFF; writes are discarded), `011GGGGGGGGGGGGGGGG` (16-bit immediate value GGGGGGGGGGGGGGGG; writes are also discarded), `100[H 31 times]` (31-bit immediate because bee you), `101IIIIIIIIIIIIIIII` (16 bits of memory location relative to the base memory address register of the stack the operation is conditional on), `110JJJJJJJJJJJJJJJJ` (16 bit memory location relative to the top value on that stack instead), `1111LLLMMM` (memory address equal to base memory address of stack LLL plus top of stack MMM), or `1110NNN` (base memory address register of stack MMM).Opcodes (numbered from 0 in order): MOV (1 source, as many destinations as can be parsed validly; the value is copied to all of them), ADD (1 destination, multiple sources), JMP (1 source), NOT (same as MOV), WR (write to output port; multiple sources, first is port number), RE (read from input port; one source for port number, multiple destinations), SUB, AND, OR, XOR, SHR, SHL (bitwise operations), MUL, ROR, ROL, NOP, MUL2 (multiplication with two outputs).

gollark: osmarksISA™️-2028 is a VLIW stack machine. Specifically, it executes a 384-bit instruction composed of 8 48-bit operations in parallel. There are 8 stacks, for safety. Each stack also has an associated base memory address register, which is used in some "addressing modes". Each stack holds 64-bit integers; popping/peeking an empty stack simply returns 0, and the stacks can hold at most 32 items. Exceeding a stack's capacity is runtime undefined behaviour. The operation encoding is: `AABBBCCCCCCCCC`:A = 2-bit conditional operation mode - 0 is "run unconditionally", 1 is "run if top value on stack is 0", 2 is "run if not 0", 3 is "run if first bit is ~~negative~~ 1".B = 3-bit index for the stack to use for the conditional.C = 9-bit opcode (for extensibility).

gollark: By "really fast", I mean "in a few decaminutes, probably".

gollark: I suppose I could just specify it really fast.

References

Timetables for Hörstel station (in German)

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[1] Timetables for Hörstel station (in German)