Gram–Schmidt process

In mathematics, particularly linear algebra and numerical analysis, the Gram–Schmidt process is a method for orthonormalizing a set of vectors in an inner product space, most commonly the Euclidean space Rⁿ equipped with the standard inner product. The Gram–Schmidt process takes a finite, linearly independent set S = {v₁, ..., v_k} for k ≤ n and generates an orthogonal set S′ = {u₁, ..., u_k} that spans the same k-dimensional subspace of Rⁿ as S.

The first two steps of the Gram–Schmidt process

The method is named after Jørgen Pedersen Gram and Erhard Schmidt, but Pierre-Simon Laplace had been familiar with it before Gram and Schmidt.[1] In the theory of Lie group decompositions it is generalized by the Iwasawa decomposition.

The application of the Gram–Schmidt process to the column vectors of a full column rank matrix yields the QR decomposition (it is decomposed into an orthogonal and a triangular matrix).

The Gram–Schmidt process

The modified Gram-Schmidt process being executed on three linearly independent, non-orthogonal vectors of a basis for R³. Click on image for details. Modification is explained in the next section of this article.

We define the projection operator by

${\displaystyle \mathrm {proj} _{\mathbf {u} }\,(\mathbf {v} )={\langle \mathbf {v} ,\mathbf {u} \rangle \over \langle \mathbf {u} ,\mathbf {u} \rangle }{\mathbf {u} },}$

where ${\displaystyle \langle \mathbf {u} ,\mathbf {v} \rangle }$ denotes the inner product of the vectors u and v. This operator projects the vector v orthogonally onto the line spanned by vector u. If u = 0, we define ${\displaystyle \mathrm {proj} _{0}\,(\mathbf {v} ):=0}$. i.e., the projection map ${\displaystyle \mathrm {proj} _{0}}$ is the zero map, sending every vector to the zero vector.

The Gram–Schmidt process then works as follows:

${\displaystyle {\begin{aligned}\mathbf {u} _{1}&=\mathbf {v} _{1},&\mathbf {e} _{1}&={\mathbf {u} _{1} \over \|\mathbf {u} _{1}\|}\\\mathbf {u} _{2}&=\mathbf {v} _{2}-\mathrm {proj} _{\mathbf {u} _{1}}\,(\mathbf {v} _{2}),&\mathbf {e} _{2}&={\mathbf {u} _{2} \over \|\mathbf {u} _{2}\|}\\\mathbf {u} _{3}&=\mathbf {v} _{3}-\mathrm {proj} _{\mathbf {u} _{1}}\,(\mathbf {v} _{3})-\mathrm {proj} _{\mathbf {u} _{2}}\,(\mathbf {v} _{3}),&\mathbf {e} _{3}&={\mathbf {u} _{3} \over \|\mathbf {u} _{3}\|}\\\mathbf {u} _{4}&=\mathbf {v} _{4}-\mathrm {proj} _{\mathbf {u} _{1}}\,(\mathbf {v} _{4})-\mathrm {proj} _{\mathbf {u} _{2}}\,(\mathbf {v} _{4})-\mathrm {proj} _{\mathbf {u} _{3}}\,(\mathbf {v} _{4}),&\mathbf {e} _{4}&={\mathbf {u} _{4} \over \|\mathbf {u} _{4}\|}\\&{}\ \ \vdots &&{}\ \ \vdots \\\mathbf {u} _{k}&=\mathbf {v} _{k}-\sum _{j=1}^{k-1}\mathrm {proj} _{\mathbf {u} _{j}}\,(\mathbf {v} _{k}),&\mathbf {e} _{k}&={\mathbf {u} _{k} \over \|\mathbf {u} _{k}\|}.\end{aligned}}}$

The sequence u₁, ..., u_k is the required system of orthogonal vectors, and the normalized vectors e₁, ..., e_k form an orthonormal set. The calculation of the sequence u₁, ..., u_k is known as Gram–Schmidt orthogonalization, while the calculation of the sequence e₁, ..., e_k is known as Gram–Schmidt orthonormalization as the vectors are normalized.

To check that these formulas yield an orthogonal sequence, first compute ${\displaystyle \langle \mathbf {u} _{1},\mathbf {u} _{2}\rangle }$ by substituting the above formula for u₂: we get zero. Then use this to compute ${\displaystyle \langle \mathbf {u} _{1},\mathbf {u} _{3}\rangle }$ again by substituting the formula for u₃: we get zero. The general proof proceeds by mathematical induction.

Geometrically, this method proceeds as follows: to compute u_i, it projects v_i orthogonally onto the subspace U generated by u₁, ..., u_i−1, which is the same as the subspace generated by v₁, ..., v_i−1. The vector u_i is then defined to be the difference between v_i and this projection, guaranteed to be orthogonal to all of the vectors in the subspace U.

The Gram–Schmidt process also applies to a linearly independent countably infinite sequence {v_i}_i. The result is an orthogonal (or orthonormal) sequence {u_i}_i such that for natural number n: the algebraic span of v₁, ..., v_n is the same as that of u₁, ..., u_n.

If the Gram–Schmidt process is applied to a linearly dependent sequence, it outputs the 0 vector on the ith step, assuming that v_i is a linear combination of v₁, ..., v_i−1. If an orthonormal basis is to be produced, then the algorithm should test for zero vectors in the output and discard them because no multiple of a zero vector can have a length of 1. The number of vectors output by the algorithm will then be the dimension of the space spanned by the original inputs.

A variant of the Gram–Schmidt process using transfinite recursion applied to a (possibly uncountably) infinite sequence of vectors ${\displaystyle (v_{\alpha })_{\alpha <\lambda }}$ yields a set of orthonormal vectors ${\displaystyle (u_{\alpha })_{\alpha <\kappa }}$ with ${\displaystyle \kappa \leq \lambda }$ such that for any ${\displaystyle \alpha \leq \lambda }$, the completion of the span of ${\displaystyle \lbrace u_{\beta }:\beta <\min(\alpha ,\kappa )\rbrace }$ is the same as that of ${\displaystyle \lbrace v_{\beta }:\beta <\alpha \rbrace }$. In particular, when applied to a (algebraic) basis of a Hilbert space (or, more generally, a basis of any dense subspace), it yields a (functional-analytic) orthonormal basis. Note that in the general case often the strict inequality ${\displaystyle \kappa <\lambda }$ holds, even if the starting set was linearly independent, and the span of ${\displaystyle (u_{\alpha })_{\alpha <\kappa }}$ need not be a subspace of the span of ${\displaystyle (v_{\alpha })_{\alpha <\lambda }}$ (rather, it's a subspace of its completion).

Example

Euclidean space

Consider the following set of vectors in R² (with the conventional inner product)

${\displaystyle S=\left\lbrace \mathbf {v} _{1}={\begin{pmatrix}3\\1\end{pmatrix}},\mathbf {v} _{2}={\begin{pmatrix}2\\2\end{pmatrix}}\right\rbrace .}$

Now, perform Gram–Schmidt, to obtain an orthogonal set of vectors:

${\displaystyle \mathbf {u} _{1}=\mathbf {v} _{1}={\begin{pmatrix}3\\1\end{pmatrix}}}$

${\displaystyle \mathbf {u} _{2}=\mathbf {v} _{2}-\mathrm {proj} _{\mathbf {u} _{1}}\,(\mathbf {v} _{2})={\begin{pmatrix}2\\2\end{pmatrix}}-\mathrm {proj} _{({3 \atop 1})}\,({{\begin{pmatrix}2\\2\end{pmatrix}})}={\begin{pmatrix}2\\2\end{pmatrix}}-{8 \over 10}{\begin{pmatrix}3\\1\end{pmatrix}}={\begin{pmatrix}-2/5\\6/5\end{pmatrix}}.}$

We check that the vectors u₁ and u₂ are indeed orthogonal:

${\displaystyle \langle \mathbf {u} _{1},\mathbf {u} _{2}\rangle =\left\langle {\begin{pmatrix}3\\1\end{pmatrix}},{\begin{pmatrix}-2/5\\6/5\end{pmatrix}}\right\rangle =-{\frac {6}{5}}+{\frac {6}{5}}=0,}$

noting that if the dot product of two vectors is 0 then they are orthogonal.

For non-zero vectors, we can then normalize the vectors by dividing out their sizes as shown above:

${\displaystyle \mathbf {e} _{1}={1 \over {\sqrt {10}}}{\begin{pmatrix}3\\1\end{pmatrix}}}$

${\displaystyle \mathbf {e} _{2}={1 \over {\sqrt {40 \over 25}}}{\begin{pmatrix}-2/5\\6/5\end{pmatrix}}={1 \over {\sqrt {10}}}{\begin{pmatrix}-1\\3\end{pmatrix}}.}$

Properties

Denote by ${\displaystyle \operatorname {GS} (v_{1},\dots ,v_{k})}$ the result of applying the Gram–Schmidt process to a collection of vectors ${\displaystyle v_{1},\dots v_{k}}$. This yields a map ${\displaystyle \operatorname {GS} \colon (\mathbf {R} ^{n})^{k}\to (\mathbf {R} ^{n})^{k}}$.

It has the following properties:

• It is continuous
• It is orientation preserving in the sense that ${\displaystyle \operatorname {or} (v_{1},\dots ,v_{k})=\operatorname {or} (\operatorname {GS} (v_{1},\dots ,v_{k}))}$.
• It commutes with orthogonal maps:

Let ${\displaystyle g\colon \mathbf {R} ^{n}\to \mathbf {R} ^{n}}$ be orthogonal (with respect to the given inner product). Then we have

${\displaystyle \operatorname {GS} (g(v_{1}),\dots ,g(v_{k}))=(g(\operatorname {GS} (v_{1},\dots ,v_{k})_{1}),\dots ,g(\operatorname {GS} (v_{1},\dots ,v_{k})_{k}))}$

Further a parametrized version of the Gram–Schmidt process yields a (strong) deformation retraction of the general linear group ${\displaystyle GL(\mathbf {R} ^{n})}$ onto the orthogonal group ${\displaystyle O(\mathbf {R} ^{n})}$.

Numerical stability

When this process is implemented on a computer, the vectors ${\displaystyle \mathbf {u} _{k}}$ are often not quite orthogonal, due to rounding errors. For the Gram–Schmidt process as described above (sometimes referred to as "classical Gram–Schmidt") this loss of orthogonality is particularly bad; therefore, it is said that the (classical) Gram–Schmidt process is numerically unstable.

The Gram–Schmidt process can be stabilized by a small modification; this version is sometimes referred to as modified Gram-Schmidt or MGS. This approach gives the same result as the original formula in exact arithmetic and introduces smaller errors in finite-precision arithmetic. Instead of computing the vector u_k as

${\displaystyle \mathbf {u} _{k}=\mathbf {v} _{k}-\mathrm {proj} _{\mathbf {u} _{1}}\,(\mathbf {v} _{k})-\mathrm {proj} _{\mathbf {u} _{2}}\,(\mathbf {v} _{k})-\cdots -\mathrm {proj} _{\mathbf {u} _{k-1}}\,(\mathbf {v} _{k}),}$

it is computed as

${\displaystyle {\begin{aligned}\mathbf {u} _{k}^{(1)}&=\mathbf {v} _{k}-\mathrm {proj} _{\mathbf {u} _{1}}\,(\mathbf {v} _{k}),\\\mathbf {u} _{k}^{(2)}&=\mathbf {u} _{k}^{(1)}-\mathrm {proj} _{\mathbf {u} _{2}}\,(\mathbf {u} _{k}^{(1)}),\\&\,\,\,\vdots \\\mathbf {u} _{k}^{(k-2)}&=\mathbf {u} _{k}^{(k-3)}-\mathrm {proj} _{\mathbf {u} _{k-2}}\,(\mathbf {u} _{k}^{(k-3)}),\\\mathbf {u} _{k}^{(k-1)}&=\mathbf {u} _{k}^{(k-2)}-\mathrm {proj} _{\mathbf {u} _{k-1}}\,(\mathbf {u} _{k}^{(k-2)}),\\\mathbf {u} _{k}&={\mathbf {u} _{k}^{(k-1)} \over \|\mathbf {u} _{k}^{(k-1)}\|}\end{aligned}}}$

This method is used in the previous animation, when the intermediate v'₃ vector is used when orthogonalizing the blue vector v₃.

Algorithm

The following MATLAB algorithm implements the Gram–Schmidt orthonormalization for Euclidean Vectors. The vectors v₁, ..., v_k (columns of matrix V, so that V(:,j) is the jth vector) are replaced by orthonormal vectors (columns of U) which span the same subspace.

n = size(V, 1);
k = size(V, 2);
U = zeros(n, k);
U(:, 1) = V(:, 1) / sqrt(V(:, 1)'*V(:,1));
for i = 2:k
    U(:, i) = V(:, i);
    for j = 1:i - 1
        U(:, i) = U(:, i) - (U(:, j)'*U(:,i) )/( U(:,j)' * U(:, j)) * U(:, j);
    end
    U(:, i) = U(:, i) / sqrt(U(:, i)'*U(:,i));
end

The cost of this algorithm is asymptotically O(nk²) floating point operations, where n is the dimensionality of the vectors (Golub & Van Loan 1996, §5.2.8).

Via Gaussian elimination

If the rows {v₁, ..., v_k} are written as a matrix ${\displaystyle A}$, then applying Gaussian elimination to the augmented matrix ${\displaystyle [AA^{\mathrm {T} }|A]}$ will produce the orthogonalized vectors in place of ${\displaystyle A}$.[2] For example, taking ${\displaystyle \mathbf {v} _{1}={\begin{pmatrix}3&1\end{pmatrix}},\mathbf {v} _{2}={\begin{pmatrix}2&2\end{pmatrix}}}$ as above, we have

${\displaystyle [AA^{\mathrm {T} }|A]=\left[{\begin{array}{rr|rr}10&8&3&1\\8&8&2&2\end{array}}\right]}$

And reducing this to row echelon form produces

${\displaystyle \left[{\begin{array}{rr|rr}1&.8&.3&.1\\0&1&-.25&.75\end{array}}\right]}$

The normalized vectors are then

${\displaystyle \mathbf {e} _{1}={1 \over {\sqrt {.3^{2}+.1^{2}}}}{\begin{pmatrix}.3&.1\end{pmatrix}}={1 \over {\sqrt {10}}}{\begin{pmatrix}3&1\end{pmatrix}}}$

${\displaystyle \mathbf {e} _{2}={1 \over {\sqrt {.25^{2}+.75^{2}}}}{\begin{pmatrix}-.25&.75\end{pmatrix}}={1 \over {\sqrt {10}}}{\begin{pmatrix}-1&3\end{pmatrix}}.}$

as in the example above.

Determinant formula

The result of the Gram–Schmidt process may be expressed in a non-recursive formula using determinants.

${\displaystyle \mathbf {e} _{j}={\frac {1}{\sqrt {D_{j-1}D_{j}}}}{\begin{vmatrix}\langle \mathbf {v} _{1},\mathbf {v} _{1}\rangle &\langle \mathbf {v} _{2},\mathbf {v} _{1}\rangle &\dots &\langle \mathbf {v} _{j},\mathbf {v} _{1}\rangle \\\langle \mathbf {v} _{1},\mathbf {v} _{2}\rangle &\langle \mathbf {v} _{2},\mathbf {v} _{2}\rangle &\dots &\langle \mathbf {v} _{j},\mathbf {v} _{2}\rangle \\\vdots &\vdots &\ddots &\vdots \\\langle \mathbf {v} _{1},\mathbf {v} _{j-1}\rangle &\langle \mathbf {v} _{2},\mathbf {v} _{j-1}\rangle &\dots &\langle \mathbf {v} _{j},\mathbf {v} _{j-1}\rangle \\\mathbf {v} _{1}&\mathbf {v} _{2}&\dots &\mathbf {v} _{j}\end{vmatrix}}}$

${\displaystyle \mathbf {u} _{j}={\frac {1}{D_{j-1}}}{\begin{vmatrix}\langle \mathbf {v} _{1},\mathbf {v} _{1}\rangle &\langle \mathbf {v} _{2},\mathbf {v} _{1}\rangle &\dots &\langle \mathbf {v} _{j},\mathbf {v} _{1}\rangle \\\langle \mathbf {v} _{1},\mathbf {v} _{2}\rangle &\langle \mathbf {v} _{2},\mathbf {v} _{2}\rangle &\dots &\langle \mathbf {v} _{j},\mathbf {v} _{2}\rangle \\\vdots &\vdots &\ddots &\vdots \\\langle \mathbf {v} _{1},\mathbf {v} _{j-1}\rangle &\langle \mathbf {v} _{2},\mathbf {v} _{j-1}\rangle &\dots &\langle \mathbf {v} _{j},\mathbf {v} _{j-1}\rangle \\\mathbf {v} _{1}&\mathbf {v} _{2}&\dots &\mathbf {v} _{j}\end{vmatrix}}}$

where D ₀=1 and, for j ≥ 1, D _j is the Gram determinant

${\displaystyle D_{j}={\begin{vmatrix}\langle \mathbf {v} _{1},\mathbf {v} _{1}\rangle &\langle \mathbf {v} _{2},\mathbf {v} _{1}\rangle &\dots &\langle \mathbf {v} _{j},\mathbf {v} _{1}\rangle \\\langle \mathbf {v} _{1},\mathbf {v} _{2}\rangle &\langle \mathbf {v} _{2},\mathbf {v} _{2}\rangle &\dots &\langle \mathbf {v} _{j},\mathbf {v} _{2}\rangle \\\vdots &\vdots &\ddots &\vdots \\\langle \mathbf {v} _{1},\mathbf {v} _{j}\rangle &\langle \mathbf {v} _{2},\mathbf {v} _{j}\rangle &\dots &\langle \mathbf {v} _{j},\mathbf {v} _{j}\rangle \end{vmatrix}}.}$

Note that the expression for u_k is a "formal" determinant, i.e. the matrix contains both scalars and vectors; the meaning of this expression is defined to be the result of a cofactor expansion along the row of vectors.

The determinant formula for the Gram-Schmidt is computationally slower (exponentially slower) than the recursive algorithms described above; it is mainly of theoretical interest.

Alternatives

Other orthogonalization algorithms use Householder transformations or Givens rotations. The algorithms using Householder transformations are more stable than the stabilized Gram–Schmidt process. On the other hand, the Gram–Schmidt process produces the ${\displaystyle j}$th orthogonalized vector after the ${\displaystyle j}$th iteration, while orthogonalization using Householder reflections produces all the vectors only at the end. This makes only the Gram–Schmidt process applicable for iterative methods like the Arnoldi iteration.

Yet another alternative is motivated by the use of Cholesky decomposition for inverting the matrix of the normal equations in linear least squares. Let ${\displaystyle \mathbf {V} }$ be a full column rank matrix, whose columns need to be orthogonalized. The matrix ${\displaystyle \mathbf {V} ^{*}\mathbf {V} }$ is Hermitian and positive definite, so it can be written as ${\displaystyle \mathbf {V} ^{*}\mathbf {V} =\mathbf {L} \mathbf {L} ^{*},}$ using the Cholesky decomposition. The lower triangular matrix ${\displaystyle \mathbf {L} }$ with strictly positive diagonal entries is invertible. Then columns of the matrix ${\displaystyle \mathbf {U} =\mathbf {V} (\mathbf {L} ^{-1})^{*}}$ are orthonormal and span the same subspace as the columns of the original matrix ${\displaystyle \mathbf {V} }$. The explicit use of the product ${\displaystyle \mathbf {V} ^{*}\mathbf {V} }$ makes the algorithm unstable, especially if the product's condition number is large. Nevertheless, this algorithm is used in practice and implemented in some software packages because of its high efficiency and simplicity.

In quantum mechanics there are several orthogonalization schemes with characteristics better suited for certain applications than original Gram–Schmidt. Nevertheless, it remains a popular and effective algorithm for even the largest electronic structure calculations.[3]

References

1. Cheney, Ward; Kincaid, David (2009). Linear Algebra: Theory and Applications. Sudbury, Ma: Jones and Bartlett. pp. 544, 558. ISBN 978-0-7637-5020-6.
2. Pursell, Lyle; Trimble, S. Y. (1 January 1991). "Gram-Schmidt Orthogonalization by Gauss Elimination". The American Mathematical Monthly. 98 (6): 544–549. doi:10.2307/2324877. JSTOR 2324877.
3. Pursell, Yukihiro; et al. (2011). "First-principles calculations of electron states of a silicon nanowire with 100,000 atoms on the K computer". SC '11 Proceedings of 2011 International Conference for High Performance Computing, Networking, Storage and Analysis: 1:1--1:11. doi:10.1145/2063384.2063386.

• Bau III, David; Trefethen, Lloyd N. (1997), Numerical linear algebra, Philadelphia: Society for Industrial and Applied Mathematics, ISBN 978-0-89871-361-9.
• Golub, Gene H.; Van Loan, Charles F. (1996), Matrix Computations (3rd ed.), Johns Hopkins, ISBN 978-0-8018-5414-9.
• Greub, Werner (1975), Linear Algebra (4th ed.), Springer.
• Soliverez, C. E.; Gagliano, E. (1985), "Orthonormalization on the plane: a geometric approach" (PDF), Mex. J. Phys., 31 (4): 743–758.

External links

• "Orthogonalization", Encyclopedia of Mathematics, EMS Press, 2001 [1994]
• Harvey Mudd College Math Tutorial on the Gram-Schmidt algorithm
• Earliest known uses of some of the words of mathematics: G The entry "Gram-Schmidt orthogonalization" has some information and references on the origins of the method.
• Demos: Gram Schmidt process in plane and Gram Schmidt process in space
• Gram-Schmidt orthogonalization applet
• NAG Gram–Schmidt orthogonalization of n vectors of order m routine
• Proof: Raymond Puzio, Keenan Kidwell. "proof of Gram-Schmidt orthogonalization algorithm" (version 8). PlanetMath.org.