Giubiasco–Locarno railway

Giubiasco–Locarno railway
	S. Antonino station
Overview
Locale	Switzerland
Termini	Giubiasco; Romanshorn
Line number	632
Technical
Line length	17.90 km (11.12 mi)
Track gauge	1,435 mm (4 ft 8 1⁄2 in)
Electrification	15 kV/16.7 Hz AC overhead catenary
Maximum incline	1.3%
Route map
	SBB-line from Bellinzona
	S 10 S 20 S 30 S 50
	SBB/Gotthard Railway line
	to Lugano S 10 S 50
	Bellinzona-Lugano via the
	Ceneri Base Tunnel (from 2020)
	Locarno-Lugano via the
	Ceneri Base Tunnel (from 2020)
	Locarno railway station
	terminus of S 20
	Source: Swiss railway atlas[1]

The Giubiasco–Locarno railway is a railway in Switzerland. It was built by the Gotthard Railway Company (Gotthardbahn-Gesellschaft, GB) on 20 December 1874 as part of the line through the Ticino valley. With the nationalisation of the Gotthard Railway on 1 May 1909, the line became part of the Swiss Federal Railways (SBB).

Train passing through S. Antonino

Working timetable of the Gotthard Railway in 1899, including the Bellinzona–Locarno section

Locarno–Giubiasco railway in 2018

History

After the foundation of the Gotthard Railway Company in December 1871, construction of the Gotthard Railway began in 1872. The construction of the valley floors in the Canton of Ticino progressed considerably faster than the complicated main line in the Alpine region. The concession for the Gotthard Railway included in Sopraceneri, among other things, a branch line through the Magadino plain to Locarno, which was completed after a short construction period at the end of 1874.

The Biasca–Bellinzona section was opened on 6 December 1874 and the opening of the Bellinzona–Giubiasco–Cadenazzo–Locarno section through the Magadino plain followed a few days later on 20 December. This line remained an island operation without connection to another standard gauge line for over seven years. The connection to the railway in the Sottoceneri valley (Lugano–Chiasso), over Monte Ceneri, was only opened on 10 April 1882 as part of the Immensee–Chiasso main line of the Gotthard Railway, which entered into full service on 1 June 1882.

Since then, the Biasca–Bellinzona–Giubiasco valley section has been considered to be part of the Gotthard main line, while the Giubiasco–Locarno section is treated as a branch line of the Gotthard Railway. The latter continues to use the chainage from Immensee—the "null kilometre point" of the Gotthard Railway. A second cross-border line between the Gotthard and Italy was opened on 4 December 1882; it branches off the Giubiasco–Locarno line at Cadenazzo and runs from there to Luino.

The Gotthard Railway Company was nationalised as of 1 May 1909, which meant that the whole GB network became the property of the Federal Railways. Under the SBB, the line was electrified with single-phase alternating current (15 Kilovolt, 16⅔ Hertz) and electrical operations started on 15 May 1936. The Giubiasco–Cadenazzo section, which is used both by trains to Locarno and to Luino, was built as double-track, with the second track being opened on 17 May 1953.

A new track alignment was put into operation between the stations of Tenero-Gordola and Locarno on 23 March 1980. The original line was shifted uphill, which involved extending it by about 600 metres. Construction of the new line involved the construction of the Mappo bridge and the Rocca-Bella tunnel.

The former Riazzino-Cugnasco station was replaced by the halt of Riazzino about 900 metres to the west in 2009.

Operations

The railway line to Locarno has traditionally been served by Gotthard expresses. While the fast InterCity connections (IC/ICN) and the cross-border EuroCity trains (EC/CIS)—the so-called "high-quality" passenger services—are reserved for the main line to Lugano–Chiasso, Locarno has an hourly InterRegio (IR) service with an intermediate stop in Cadenazzo. These are the two-hourly Basel–Luzern–Locarno and Zürich–Zug–Locarno IR services, which overlap on the Arth-Goldau–Bellinzona–Locarno section of the Gotthard Railway, resulting in an hourly service.

Regional transport has been marketed as part of the Rete celere del Canton Ticino since 2004 and is managed by the SBB subsidiary TILO. The half-hourly S20 (Bellinzona–Locarno) service serves the whole route and stops at all normal stops. The cross-border S30 (Cadenazzo–Luino) service runs over the Giubiasco–Cadenazzo section with some services running to/from Bellinzona.

gollark: I said 144, yes, but it's 146 now.

gollark: LessThan146BotsAndThereforeInferiorServer?

gollark: soundserver?

gollark: SpoutServer?

gollark: I reject your mathematical axioms and substitute my own.

References

Footnotes

Eisenbahnatlas Schweiz (Swiss railway atlas). Schweers + Wall. 2012. pp. 59, 61. ISBN 978-3-89494-130-7.

Sources

Wägli, Hans G. (1998). Schienennetz Schweiz (in German). Zürich: AS Verlag. ISBN 3-905111-21-7.CS1 maint: ref=harv (link)
Wägli, Hans G. (2004). Bahnprofil Schweiz 2005 (in German). Grafenried: Diplory Verlag.CS1 maint: ref=harv (link)

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.

[Eisenbahnatlas-1] Eisenbahnatlas Schweiz (Swiss railway atlas). Schweers + Wall. 2012. pp. 59, 61. ISBN 978-3-89494-130-7.