Geared continuous hinge

A geared continuous hinge is a type of continuous hinge used mostly on doors in high-traffic entrances and features gear teeth that mesh together under a cap that runs the length of the hinge. The hinges use a number of fasteners to attach the door to the frame from top to bottom to distribute a door’s weight more evenly along the frame to stop doors from sagging.[1] They are often used in schools, hospitals, hotels, offices, airports, stadiums, storefronts and many other commercial and industrial buildings.

Geared continuous hinge
detail of the above picture

They are generally made from extruded architectural aluminum and most are anodized to resist corrosion (common colors include black, bronze and clear). To meet building fire codes, they can be made with up to a three-hour fire rating.

Styles

Geared continuous hinges are available in several styles,[2] including concealed, full surface (mortise), half surface (mortise), swing clear and toilet partition models for new construction and retrofit applications.

History

In 1963 Austin Baer, an MIT-trained engineer, earned a patent for his design of hinge leaves with intermeshed gears. In 1968, he earned a second patent for adding thrust bearings to the original design. All geared hinges today are based on this design, which distributes the door’s weight over the entire door length rather than concentrated on two or three spots as with butt or pivot hinges. The gears allowed fluid movement as the door opened and closed.

Baer's patent expired in 1985. He sold his company to a national manufacturer in 1989. With the sale, and with other companies beginning to manufacture geared continuous hinges, the market soon went from regional to national.

Later the hinges were tested to verify their endurance. In 2004, a geared continuous hinge earned 60 minute Ballistic Resistance and Forced Entry certification from the United States Department of State for use in its embassies overseas.[3] In 2005, a geared continuous hinge surpassed 25 million open/close cycles in the ANSI (American National Standards Institute) Physical Endurance Swing Test at Architectural Testing, Inc. in St. Paul, Minn.[4]

Today, every major U.S. commercial hardware manufacturer now offers a line of geared continuous hinges.

gollark: Bye then.
gollark: Vote for me based on actual *policies* and not *arbitrary personal judgements*!
gollark: That is a *stupid* way to decide on voting!
gollark: ...
gollark: Why did you vote for keanu' anyway'?

See also
  • Door – Movable barrier that allows ingress and egress
  • Hinge – Mechanical bearing that connects two solid objects, typically allowing only a limited angle of rotation between them

References
  1. Cronk, Bob (1 November 2000), "Stop Sagging Doors", American School and University, retrieved 29 June 2012
  2. A Guide to Builders Hardware Terminology: Hinges, BHMA, archived from the original on 5 September 2012, retrieved 29 June 2012
  3. Fields, Bryan (February 2005), "Bullets, Bombs and Brutal Attacks: State Department Puts Unusual Demands on Hinges", Doors & Hardware: 34
  4. SELECT Hinges™ Sets Record; Reaches 25 Million in Cycle Testing, USGlass News Network, 2006, retrieved 29 June 2012
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.