Fresno Traction Company

Fresno Traction Company operated electric trams in Fresno, California, from 1903 to 1939. Earlier horsecar tracks were improved and electrified under consolidated ownership which passed to Southern Pacific Transportation Company operation in 1910. A separate Fresno Interurban Railway shared some lines along Fresno city streets.

Preceding horsecar operations

After incorporation of the City of Fresno in 1885, the Fresno Street Railroad began operating horsecars in 1889 from H Street along Mariposa Street, K Street and Tulare Street to the east city limit. The street railway system was later extended to the south city limit along F Street, Santa Clara Avenue, C Street and Elm Avenue. The Fresno City, Belmont, and Yosemite Railroad was granted a separate charter to build a 20-pound T rail line to the north city limit along J Street, Tuolumne Street and O Street. The Fresno Railroad built a 20-pound T rail line along I street to the south city limit, and along Ventura Avenue to the Fresno County fairgrounds. The Fresno City Railway rebuilt these horsecar lines with 11.5 miles (18.5 km) of 61-pound rail in 1901 in preparation for heavier electric streetcars.[1]

Expansion

The Fresno Traction Company was incorporated in 1903 authorized to build 196 miles (315 km) of electric railroads connecting Fresno to Selma, Trimmers Springs, Wawona, Central, and Washington Colonies. Electric operations commenced with three single truck Hammond cars purchased from the United Railroads of San Francisco, and five California cars built by W. L. Holman Car Company. After 4 miles (6.4 km) of new track had been laid, these expansion plans were curtailed by the 1906 San Francisco earthquake. By 1909 the Fresno Avenue subway had been built under the steam railroad line, and lines along Tulare Street, Fresno Avenue, and J Street had been improved with double track. A car barn and repair shop was built at the end of Tulare Street to hold ten new double-truck Paye cars built by American Car Company.[1]

Southern Pacific (SP) purchased a controlling stock interest in 1910 and replaced most of the older rail with heavier 75-pound rail. The Roeding Park branch line was completed in 1912, and four longer Paye cars were purchased from the Jewett Car Company. A line was completed to the company-owned Fresno Beach in 1915. A total of 41.55 miles (66.87 km) of track was in operation when automobile competition halted further expansion after World War I. Power was purchased from San Joaquin Light and Power Corporation at 1000 volt, 60 cycle, 3 phase AC and converted to 550 volt DC in substations at O and Platt Streets, at Herndon and Forkner Avenues, and on Blackstone Avenue near Webster Street. Nineteen Birney cars were placed in operation after the war, and the original Hammond cars were replaced by twelve lightweight double-truck cars built by St. Louis Car Company in 1925. Individual lines were abandoned as service contracted through the 1930s; and all streetcar operations ended on 20 May 1939.[1]

Roster
Number Builder Type Date Length Notes
1 J. G. Brill Company Box motor 1903 30 ft Four 50 horsepower (37 kW) motors
2-9 Hammond double-truck California cars 1903 30 ft all retired by 1926
10-12 Hammond single-truck California cars 1896 28 ft built for United Railroads of San Francisco; purchased 1904
14-16 Stockton Open trailers 1888 former horsecars converted 1902-3; scrapped before 1920
17-21 W. L. Holman Car Company double-truck California cars 1906 32 ft rebuilt into Pay-As-You-Enter (PAYE) cars before 1920
22-24 Stockton Open trailers 1888 former horsecars converted 1902-3; scrapped before 1920
25-34 American Car Company PAYE double-truck California cars 1909 37 ft 2 in retired 1933
41-44 Jewett PAYE double-truck California cars 1912 42 ft 8 in 40 seats; became Peninsular Railway #70-73
51-54 J. G. Brill Company double-truck low-floor trams 1913 44 ft scrapped 1932
59-60 St. Louis Car Company Birneys 1920 28 ft 32 seats; built for Stockton Electric; purchased 1924
61-77 American Car Company Birneys 1919 28 ft 32 seats; #61-66 to Stockton Electric in 1939
81-92 St. Louis Car Company double-truck 1925 42 ft 5 in 36 seats; #81-83 to Pacific Electric #150-152 in 1933; #84-92 to Central California Traction Company in 1939

Fresno Interurban

The Fresno Interurban Railway was incorporated in 1914 to build a 26-mile (42 km) electric railway from Fresno to Clovis, California. Construction of that line proceeded slowly eastward from Fresno with a Hall-Scott gasoline motor car providing service over the completed portion. The 100 horsepower (75 kW) Hall-Scott car #1 seated 43 passengers. While construction of the line to Clovis was underway, an electrified branch line was put in operation between J Street and Fresno State College with two 48-passenger cars (#102 & #103) leased from the Peninsular Railway. When the Hall-Scott car broke down in September, 1917, Santa Fe Railroad #2157 0-6-0 was leased to continue service over the main line. Passenger service to Fresno State College ended when the interurban declared bankruptcy in 1918; and Santa Fe purchased the company in 1922. The incomplete line toward Clovis was improved in 1924 to serve as a freight branch of the Santa Fe Railroad.[2]

Sources
  1. Renovich, Steve (1960). "Fresno Traction". The Western Railroader. Francis A. Guido. 23 (248): 3–6.
  2. Renovich, Steve (1960). "Fresno Interurban". The Western Railroader. Francis A. Guido. 23 (248): 15 & 16.
gollark: As a somewhat accursed alternative to the service actually having reasonable query times or some built-in way to get priority.
gollark: Queue position arbitrage seems like a cool idea, actually.
gollark: I have a mostly underutilized VPS running random routing tasks and monitoring for this sort of thing.
gollark: Excellent, guess I'll consider using that.
gollark: I was looking at it, but since I think the backend is closed source I currently just operate a somewhat accursed Wireguard network with routing.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.