Foot-pound (energy)

The foot-pound force (symbol: ft⋅lbf[1] or ft⋅lb)[2] is a unit of work or energy in the engineering and gravitational systems in United States customary and imperial units of measure. It is the energy transferred upon applying a force of one pound-force (lbf) through a linear displacement of one foot. The corresponding SI unit is the joule.

Not to be confused with Pound-foot (torque) or Foot-poundal.
Foot-pound
Unit systemEnglish engineering units and British gravitational system
Unit ofEnergy
Symbolft⋅lbf 
Conversions
1 ft⋅lbf in ...... is equal to ...
   SI units   1.355818 J
   CGS units   13,558,180 erg

Usage

The foot-pound is often used to specify the muzzle energy of a bullet in small arms ballistics, particularly in the United States.

"Foot-pound" is also used as a unit of torque (see pound-foot (torque)). In the United States this is often used to specify, for example, the tightness of a fastener (such as screws and nuts) or the output of an engine. Although they are dimensionally equivalent, energy (a scalar) and torque (a Euclidean vector) are distinct physical quantities. Both energy and torque can be expressed as a product of a force vector with a displacement vector (hence pounds and feet); energy is the scalar product of the two, and torque is the vector product.

Although calling the torque unit "pound-foot" has been academically suggested, both are still commonly called "foot-pound" in colloquial usage. To avoid confusion, it is not uncommon for people to specify each as "foot-pound of energy" or "foot-pound of torque" respectively.

Conversion factors

Energy

1 foot pound-force is equivalent to:

Power

1 foot pound-force per second is equivalent to:

Related conversions:

  • 1 watt ≈ 44.25372896 ft⋅lbf/min = 0.737562149333 ft⋅lbf/s
  • 1 horsepower (mechanical) = 33,000 ft⋅lbf/min = 550 ft⋅lbf/s
gollark: I like useful errors.
gollark: But unless you have an *actual security reason* I would disagree with that.
gollark: > This status code is commonly used when the server does not wish to reveal exactly why the request has been refused,That's the use I was talking about, I guess, but not always relevant.
gollark: 10.4.5 404 Not Found The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address. This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
gollark: I can't ctrl+F that in RFC 2616.

See also

References
  1. IEEE Std 260.1™-2004, IEEE Standard Letter Symbols for Units of Measurement (SI Units, Customary Inch-Pound Units, and Certain Other Units)
  2. Budynas, Richard G.; Nisbett, J. Keith (2014-01-27). Mechanical Engineering Design. McGraw Hill Education. ISBN 978-0073529288.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.