FR-2

FR-2 (Flame Resistant 2) is a NEMA designation for synthetic resin bonded paper, a composite material made of paper impregnated with a plasticized phenol formaldehyde resin, used in the manufacture of printed circuit boards. Its main properties are similar to NEMA grade XXXP (MIL-P-3115) material, and can be substituted for the latter in many applications.

Applications

FR-2 sheet with copper foil lamination on one or both sides is widely used to build low-end consumer electronic equipment. While its electrical and mechanical properties are inferior to those of epoxy-bonded fiberglass, FR-4, it is significantly cheaper. It is not suitable for devices installed in vehicles, as continuous vibration can make cracks propagate, causing hairline fractures in copper circuit traces. Without copper foil lamination, FR-2 is sometimes used for simple structural shapes and electrical insulation.

Properties

Property Value
Dielectric constant, or relative permittivity 4.5 @ 1 MHz
Dissipation factor 0.024–0.26 @ 1 MHz
Dielectric strength 29 kV/mm (740 V/thou)

Fabrication

FR-2 can be machined by drilling, sawing, milling and hot punching. Cold punching and shearing are not recommended, as they leave a ragged edge and tend to cause cracking. Tools made of high-speed steel can be used, although tungsten carbide tooling is preferred for high volume production.

Adequate ventilation or respiration protection are mandatory during high-speed machining, as it gives off toxic vapors.

Trade names and synonyms

  • Lamitex
  • Paxolin, Paxoline
  • Pertinax, now defunct and taken over by Lamitec[1]
  • Phenolic paper
  • Synthetic resin bonded paper (SRBP)
  • Veroboard
gollark: <@113673208296636420> It shows basically every page!
gollark: <@113673208296636420> I mean, if you want a rough explanation of the functioning of it:- pages are fetched from their server- pages are parsed for text content/links in them- links are added to the crawl queue- the crawler bit goes through *those* pages if they're on a whitelisted domain- the text content is converted into tokens, and the frequency is counted, then divided by the total tokens on a page (this is "weight")- the tokens in each page are stored in the DATABASE™ (as well as the other stuff)- when a search is run, it finds any page containing the tokens in the search, and they're sorted by weight of each token within them times the frequency of that token in the DATABASE™
gollark: What do you mean?
gollark: observe the highly advanced osmarks.tk search engine
gollark: Whom?

See also

References

  1. "lamitec.de". Archived from the original on 2006-08-04. Retrieved 2006-08-05.


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.