FCM 1A

The FCM 1A was French heavy tank that served as a prototype of the Char 2C.

FCM 1A
TypeHeavy tank
Place of originFrance
Specifications
Mass41.2 t (45.4 short tons)
Length8.27 m (27 ft 2 in)
Width2.842 m (9 ft 3.9 in)
Height3 m (9 ft 10 in)
Crew7, later reduced to 6
Armor35 mm (1.4 in) front, 21 mm (0.83 in) sides and rear.
Main
armament
Canon de 105 mle 1913 Schneider, 122 rounds
Secondary
armament
2 8mm Lebel Hotchkiss M1914 machine gun
EngineRenault, twelve cylinder
220 horsepower (160 kW)
Ground clearance40 mm (1.6 in)
Maximum speed 2–10 km/h (1.2–6.2 mph)

Development

The FCM 1A began development in January 1917 when 200 hp engines became available. Trials where planned to start at the beginning of May after the first prototype began construction in April. However, after the failed Nivelle Offensive, the first operation where French tanks were used, all French tank development was halted. After a reversal of that decision, development was repeatedly delayed due to multiple problems.[1]

Testing began on 20 November 1917 after six months of delays. The vehicle was the largest tank built up to that point, measuring 8.27 m (27.1 ft) long. The hull was extremely elongated in order to cross the trenches of the Western Front. The tank originally had a crew of 7, but the crew was reduced to 6 in December. The main armament was a shortened version of the Canon de 105 Court Schneider with a large ammunition capacity of 122 rounds.[2]

It had a Renault 220 hp engine, allowing a maximum speed of 10 km/h (6.2 mph) and a minimum speed of 2 km/h (1.2 mph). The suspension consisted of bogies, sprung by leaf springs, of four wheels. The tank could cross a 3.5 m (11 ft) gap and overcome a 1 m (3.3 ft) gap.[2]

Mobility tests showed issues with the tank’s tracks and with the engine overheating, but mobility was deemed satisfactory. Firing tests conducted between 5 - 7 February 1918 also had satisfactory results.[3]

gollark: Your personal computer probably has basically as much single-threaded performance as the best available ones now, give or take 40%, which is actually quite substantial but oh well.
gollark: That probably doesn't help if your thing isn't already parallel.
gollark: GPU acceleration is hard. Running mostly independent things in parallel on CPU probably isn't.
gollark: Does Matlab have some kind of profiler to find the slowest bits?
gollark: Can you evaluate each configuration in parallel in the genetic algorithm bit?

References

Citations
  1. Press (2017), p. 43.
  2. Press (2017), p. 44.
  3. Press (2017), p. 45.

Bibliography
  • Ray, Merriam (2017-04-01). World War 2 In Review: French Fighting Vehicles. Merriam Press. ISBN 9781365864865 – via Lulu Press, Inc.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.