Edburton Castle Ring

Edburton Castle Ring (or Castle Rings) is an archaeological site in West Sussex, England, on the peak of Edburton Hill on the South Downs, near the villages of Edburton and Fulking. It is a Scheduled Monument.[1]

Edburton Castle Ring
The ditch on the north-eastern side of the bailey
TypeMotte-and-bailey castle
LocationWest Sussex
grid reference TQ 238 110
Coordinates50°53′7″N 0°14′30″W
Designated26 June 1953
Reference no.1012171
Location of Edburton Castle Ring in West Sussex

Description

It is a motte-and-bailey castle, thought to have been built soon after the arrival of the Normans in 1066.[1][2]

The castle survives as earthworks. The motte is a mound of diameter 30 metres (98 ft) and height 2 metres (6 ft 7 in), surrounded by a ditch of width about 6 metres (20 ft). There is a depression in the centre of the motte where there was 19th-century excavation, the monument being mistaken for a barrow. Adjoining the motte to the north is the bailey; the bank enclosing the bailey is up to 1.2 metres (3 ft 11 in) above the interior and up to 14 metres (46 ft) across, with an external ditch of width about 6 metres (20 ft).[1]

gollark: I meant fusion reactors, and AE2 can do it.
gollark: Also, how do you get certain fluids out of the reactor?
gollark: Ah. There definitely isn't.
gollark: I'm going to replace it with D-D, D-T and D-He3, assuming there's actually any way to make the amount of fuel balance out.
gollark: This explains the terrible power output of my fusion reactor. H-H isn't a good reaction.

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.