Dry box

A dry box is a storage container in which the interior is kept at a low level of humidity. It may be as simple as an airtight and watertight enclosure, or it may use active means to remove water vapor from the air trapped inside.

Dry boxes are used to safely store items that would otherwise be damaged or adversely affected by excessive humidity, such as cameras and lenses (to prevent fungal growth), 3D printing filament (to prevent expansion during printing), and musical instruments (to prevent humidity induced swelling or shrinkage of wooden instrument parts). They are also used in the storage of surface mount electronic components prior to circuit board assembly, to prevent water absorption that could flash into steam during soldering, destroying the part.

Types

Desiccant boxes

A simple dry box can consist of nothing more than a sealed, airtight box containing a desiccant, such as silica gel or anhydrous calcium chloride. These can be easily built at relatively low cost. However, the humidity level in such boxes cannot be controlled or regulated, owing to the difficulty of gauging the quantity of desiccant required to achieve a certain humidity level. Repeated opening of such boxes, allowing humid ambient air to enter, can saturate the desiccant, and some desiccants can have corrosive or other harmful effects on the contents of the box if they collect enough water to dissolve.

Electronic dry boxes

Electronic dry boxes contain a small Peltier cooler, which removes moisture from the air by condensing it out. A control dial is usually provided that permits the user rough adjustment of the humidity level. More sophisticated designs link the cooler to a settable digital hygrometer, allowing very precise humidity level control.

Another form of electronic dry box technology utilizes multi-porous molecular sieve desiccants to adsorb moisture. This moisture and humidity control technology is renewable without having to replace desiccants. Many electronic dry box manufacturers have utilize or switch to this technology as there are less limitation than the Peltier cooler which is less effective in removing moisture in colder ambient temperatures.

gollark: Which are probably basically the same but fancier-sounding.

gollark: And perhaps awful "handles" could be replaced with cool and trendy things like "streams".

gollark: Non-evil FS API ideas:- direct `write`/`read` access - no handles or handles emulated on top of this - either that or your thing can implement *either* handles *or* direct read/write and have the API translate it- no `fs.find`, `fs.combine`, `fs.complete`, `fs.getDir`, `fs.getName`- `mount`/`unmount`- per-file metadata

gollark: Well, actually, potatOS does support it, unless your handle happens to be to a virtualized file, at which point it'll just crash horribly somewhere.

gollark: Also you'll doom all VFS writers to an eternity of suffering.

References

Sources

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.