Downhole heat exchanger

A downhole heat exchanger, (DHE) also called a borehole heat exchanger, (BHE) is a heat exchanger installed inside a borehole.[1] It is used to capture or dissipate heat to or from the ground. DHT's are used for geothermal heating, sometimes with the help of a geothermal heat pump.

Bottom end of a Downhole heat exchanger
Top end of a Downhole heat exchanger

Types

U-tube

The heat exchanger usually consists of one or two u-tubes through which the carrier fluid, usually water, circulates. The space around the u-tubes is filled with groundwater or backfilled with thermally conductive grout.

Open pipe

Another design uses a single open pipe to flow water downward. The water then returns through the annular gap between the pipe and the casing. This design provides better thermal contact than u-tubes, but risks contamination by groundwater. Since this involves practically no downhole equipment, these systems usually only go by the name of borehole heat exchangers (BHT).

Standing column well

If no casing is installed and groundwater is permitted to charge the system, this arrangement is no longer a BHT, but rather a standing column well.

gollark: Don't worry, under rule something I won't* spoil it. However, I do not consider posting contextless images which don't appear to imply much of a long-ago-released series "spoilers".
gollark: I watched the entire show ever a few months back.
gollark: Spoilers? I'm 80% confident that's the first series.
gollark: ↑ Tux1 futilely fleeing from the heavserver™ Retrieval Teams.
gollark: https://tenor.com/view/infinity-train-tulip-olsen-tulip-running-gif-15485592

References
  1. "Downhole Heat Exchangers" (PDF). Geo-Heat Center - Oregon Institute of Technology. Retrieved 21 April 2013.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.