Dittligsee
Dittligsee is a lake in the Canton of Berne, Switzerland, near Blumenstein and Wattenwil. Its surface area is 6.02 ha (14.9 acres).
| Dittligsee | |
|---|---|
 | |
| Location | Canton of Berne |
| Coordinates | 46°45′22″N 7°32′1″E |
| Primary outflows | Fallbach |
| Basin countries | Switzerland |
| Surface area | 6.02 ha (14.9 acres) |
| Max. depth | 16.4 m (54 ft) |
| Surface elevation | 652 m (2,139 ft) |
Description
The lake is situated at an elevation of 652m (2,139 ft) and is almost completely surrounded by reed. Water is deposited into the lake via drainage pipes, while the lake itself flows into a stream, Fallbach.[1]
Attractions
Other than a small wooden pier, the lake is mostly inaccessible.[2]
gollark: SMH my head at this.
gollark: IKR, right? Give everyone infinite diamonds!!!!
gollark: And the books I turned into plates (those are consumed normally, I know, but you usually get multiple uses out of the plates) are kind of expensive.
gollark: If so, some warning would have been nice since those cost 60 and 40 XP levels each.
gollark: <@478798120650670091> Did you adjust the bibliocraft config or something? I made enchanted plates for a looting III/protection IV and unbreaking III book, and then made a single book from each, and it seems to have consumed them?
References
- "Dittligsee". www.daniel-hos.ch. Retrieved 2017-11-02.
- "Gemeinde Forst-Längenbühl". www.forst-laengenbuehl.ch (in German). Retrieved 2017-11-02.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.