Diethyl dithiophosphoric acid

Diethyl dithiophosphoric acid, sometimes mistakenly called diethyl dithiophosphate, is the organophosphorus compound with the formula (C2H5O)2PS2H. It is the processor for production of the organophosphate insecticide Terbufos. Although samples can appear dark, it is a colorless liquid.[1]

Diethyl dithiophosphoric acid
Names
IUPAC name
Diethoxy-sulfanyl-sulfanylidene-λ5-phosphane
Other names
O,O-Diethyl dithiophosphoric acid; Diethyl dithiophosphate; Diethyl phosphorodithioate; Diethyl ester of phosphorodithioic acid
Identifiers
3D model (JSmol)
ChEMBL
ChemSpider
ECHA InfoCard 100.005.506
EC Number
  • 206-055-9
RTECS number
  • TD7350000
UNII
Properties
C4H11O2PS2
Molar mass 186.22 g·mol−1
Appearance colorless liquid
Melting point < 0 °C (32 °F; 273 K)
Boiling point 66 °C (151 °F; 339 K) at 1 mmHg
Hazards
GHS pictograms
GHS Signal word Danger
GHS hazard statements
 H301, H311, H314, H330
P260, P264, P270, P271, P280, P284, P301+310, P301+330+331, P302+352, P303+361+353, P304+340, P305+351+338, P310, P312, P320, P321, P322, P330, P361, P363, P403+233, P405, P501
NFPA 704 (fire diamond)
Flammability code 2: Must be moderately heated or exposed to relatively high ambient temperature before ignition can occur. Flash point between 38 and 93 °C (100 and 200 °F). E.g. diesel fuelHealth code 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasReactivity code 1: Normally stable, but can become unstable at elevated temperatures and pressures. E.g. calciumSpecial hazards (white): no code
2
3
1
Flash point 82 °C (180 °F; 355 K)
538 °C (1,000 °F; 811 K)
Lethal dose or concentration (LD, LC):
500 mg/kg (rabbit, dermal)
4510 mg/kg (rat, oral)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

It is prepared by treating phosphorus pentasulfide with ethanol:[2]

P2S5 + 4 C2H5OH → 2 (C2H5O)2PS2H + H2S

Reactions
Zinc dithiophosphate.

Diethyl- and dimethyl dithiophosphoric acids react with bases. The results of this neutralization reaction are salts, e.g., ammonium diethyl dithiophosphate.[3]

Diethyl dithiophosphoric acid reacts with zinc oxide to give zinc dithiophosphate, which is used as an oil additive:[4]

ZnO + 2 (C2H5O)2PS2H → [(C2H5O)2PS2]2Zn + H2O
gollark: Really, LyricLy? Really?
gollark: "Go" means "Go away while you still can, ææææææææa this is bad".
gollark: Is bad.
gollark: This would displease Ferris, I think.
gollark: I mean, LyricLy's Rust entry can't because Ferris would be displeased, and that clearly works.

See also

References
  1. J. Svara, N. Weferling, T. Hofmann "Phosphorus Compounds, Organic" in Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim, 2006. doi:10.1002/14356007.a19_545.pub2
  2. Lefferts, J. L.; Molloy, K. C.; Zuckerman, J. J.; Haiduc, I.; Guta, C.; Ruse, D. (1980). "Oxy and thio phosphorus acid derivatives of tin. 1. Triorganotin(IV) dithiophosphate esters". Inorganic Chemistry. 19 (6): 1662–1670. doi:10.1021/ic50208a046.
  3. Okuniewski, Andrzej; Becker, Barbara (2011). "Ammonium O,O′-diethyl dithiophosphate". Acta Crystallogr. E. 67 (7): o1749–o1750. doi:10.1107/S1600536811022811. PMC 3151957. PMID 21837134.
  4. H. Spikes "The history and mechanisms of ZDDP" Tribology Letters, Vol. 17, No. 3, October 2004. doi:10.1023/B:TRIL.0000044495.26882.b5.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.