Dick Casull

Richard J. "Dick" Casull (/kə'sul/) (February 15, 1931 – May 6, 2018)[1] was a Salt Lake City-born[2] gunsmith and wildcat cartridge developer whose experiments with .45 Colt ammunition in the 1950s led to the creation of the .454 Casull cartridge. Casull's passion were six-shooters, and he was determined to create a high velocity round for the .45 Colt. His goal was to achieve a muzzle velocity of 2,000 feet per second with Colt .45 rounds fired from a single-action Army-style revolver with a ​7 1⁄2inch barrel. This proved impossible due to the tensile strength of the Colt .45 cylinder, so he set out to develop his own casing and bullet.

Casull began his career as a wildcat cartridge developer after having contact with Elmer Keith in the 1940s, an Idaho rancher, firearms enthusiast, and author. Keith was instrumental in the development of the first magnum revolver cartridge, the .357 Magnum, as well as the later .44 Magnum and .41 Magnum cartridges. Keith was instrumental in the development of various wildcat cartridges, a few of which were later adopted as factory rounds.

Casull also worked with Oregon-based gunsmith P.O. Ackley, the famous wildcat cartridge developer. Ackley developed a family of improved wildcat cartridges by rechambering extant firearms and fireforming the ammunition to decrease body taper and increase shoulder angle, resulting in a higher case capacity. Ackley improved not only standard cartridges but was the creator of the first .17 caliber (4.5 mm) centerfire cartridge. He developed the .450 Ackley Magnum (based on a .375 H&H Magnum case necked up to .458) and the .475 Ackley Magnum (based on a .375 H&H Magnum necked up to .475 (12 mm)).

Casull .454 cartridge

Though he developed many wildcat cartridges for pistols and rifles, Casull is most famous for creating the .454 Casull cartridge in 1957 with Jack Fullmer.[3] It was first announced in November 1959 by Guns & Ammo magazine. The basic design was a lengthened and structurally improved .45 Colt case.[3] The wildcat cartridge finally went mainstream in 1997, when Ruger began chambering its Super Redhawk in this caliber. Taurus followed with the Raging Bull model in 1998 and the Taurus Raging Judge Magnum in 2010. Taurus also made a now-discontinued Rossi-branded R92 lever action carbine clone of the Winchester 1892 chambered for the .454 Casull.[4][5] For brush hunting and wilderness packing, the Rossi R92 carbine .454 Casull offered optional magazine-tube loading and a recoil absorbing butt pad.[6][7]

Mini Revolvers

Casull began developing a mini-revolver design, which was licensed by the short-lived Rocky Mountain Arms Corp. (RMAC) of Salt Lake City, Utah. In 1971, RMAC began producing a mini-revolver chambered in .22 short. Casull's original design used a lever attached to the hammer to lock the cylinder in place. He later redesigned his mini-revolver to place the locking mechanism on the bottom of the frame, eliminating the lever attached to the hammer. He was granted U.S. Patents 4228606 and 4228608 in 1980 for the mechanism for mounting the cylinder to the frame for the cylinder locking mechanism, respectively.[8]

Freedom Arms

In 1978, Casull became a partner of Wayne Baker in the Freedom, Wyoming-based Freedom Arms firearms manufacturing business to produce a 5-shot mini revolver in .22 LR known as "The Patriot". It was later offered in .22 Short and .22 WMR.[9] A 4-shot mini revolver was also produced by Freedom Arms. The production of mini-revolvers by Freedom Arms ceased in 1990.[10] Casull was granted U.S. Patent 4385463 in 1983 for a floating firing pin for mini revolvers and U.S. Patent 4450992 in 1984 for a belt buckle holster that would hold a mini revolver.[8] The mini-revolver design was sold to North American Arms.

Single-Action Revolvers
Freedom Arms M83 Revolver

Casull began building a number of 5-shot prototypes on Ruger Super Blackhawk frames. The Freedom Arms Model 83 single-action revolver chambered in .454 Casull was introduced in 1983.[11] This model is still manufactured today as the Model 83.[12]

A number of variants upon the Model 83 have been produced, all with five-shot cylinders. The first was a .45 Colt in February 1986, followed closely by a .44 Magnum version.[13] In 1991, Freedom Arms introduced the Model 252 in .22 long rifle and in 1992 the model 353 in .357 Magnum. In 1993 the Model 555 was introduced in .50 Action Express. .41 Magnum and .475 Linebaugh chamberings were introduced in 1997 and 1999 respectively.[10][14] Freedom Arms introduced their own .500 Wyoming Express in the Model 83 .500 WE in 2005.[15]

The Model 97 design, with a Model 83 frame of reduced size, was introduced in 1997, originally with a six-shot .357 Magnum cylinder (.38 Special cylinder available). A five-shot .45 Colt chambering was introduced the following year, as was a five-shot .41 Magnum in 2000. Six-shot .22's are produced with .22 LR sporting and match-grade cylinders available, as well as .22 Magnum, from 2003.[14] A five-shot .44 Special chambering came in 2004.[16]

The Model 2008, introduced in 2010, is a single-shot pistol with interchangeable barrels, most in rifle chamberings.[17]

Other gun manufacturers have since began manufacturing single-action revolvers chambered in .454 Casull.

Official Gun of Wyoming Proposal

In 2013, Wyoming State Rep. Richard Cannady (R-Glenrock) introduced a bill to make Freedom Arms Model 83 single-action revolver chambered in .454 Casull as Wyoming's official state gun.[18]

gollark: But really, why *not* have SQLite3? It... stores data, it has transactions, it's very well-tested, it satisfies the requirements of Protocol APIO-A33ρ.
gollark: I think systemd actually does roughly that, but with targets.
gollark: I mean, yes, I *could* just use a folder of "services" and a folder of "enabled services" and some symlinks, and that *would* probably work.
gollark: Oh, I have a fun idea, I can use SQLite3 for storing data like which services are enabled.
gollark: Obviously this will have to know when a process exits so it can restart it, but people want to be able to stop/start/restart a service.

See also

References
  1. "Richard "Dick" Casull". Schwab Mortuary. Retrieved May 17, 2018.
  2. Richard “Dick” Casull (1931-2018) - Find A Grave Memorial Retrieved 2018-09-09.
  3. Barnes, Frank C.; Skinner, Stan (October 20, 2009). Cartridges of the World 12th Edition: A Complete and Illustrated Reference for Over 1500 Cartridges. Krause Publications. p. 568. ISBN 978-0-89689-936-0.
  4. Real Guns - Rossi's R92 454 Casull, Part II
  5. Taurus - Lever Action Rifles
  6. Guns America - discontinued Rossi 92 .454 Casull Stainless Trapper 16
  7. Rossi R92 Round Barrel 16" Carbine
  8. Buffaloe, Ed. "Mini Revolvers". The Unblinking Eye. Retrieved 13 August 2013.
  9. Jerry Ahern (2010), Gun Digest Buyer's Guide to Concealed-Carry Handguns, Gun Digest Books, pp. 21–22, ISBN 1-4402-1383-6
  10. Hartink, A.E. (2003). The Complete Encyclopedia of Pistols and Revolvers. Edison, New Jersey: Chartwell Books, Inc. pp. 132–134. ISBN 978-0-7858-1871-7.
  11. John Taffin (February 2003), "Flat-shooting trail gun: Casull 3800", Guns Magazine
  12. Barnes, Frank C.; Skinner, Stan (2003). Cartridges of the World: 10th Edition, Revised and Expanded. Krause Publications. p. 528. ISBN 978-0-87349-605-6.
  13. John Taffin (September–October 2008), "Freedom arms: 25 years of sixgun perfection", American Handgunner
  14. John Taffin (May–June 2004), "Freedom Arms Model 97 - The Sixgunner", Guns Magazine
  15. "Freedom Arms' biggest big bore: the 1/2"-bore fan gets a new cartridge and a stellar one it is", Guns Magazine, April 2006
  16. John Taffin (May 2004), "Freedom arms Model 97 .44 special", Guns Magazine
  17. Dan Shideler, Gun Digest 2012, p. 251, ISBN 1-4402-1447-6
  18. "Wyoming Lawmakers Push .454 Casull Revolver As Official State Firearm". Texas Fish & Game. Archived from the original on 13 August 2013. Retrieved 13 August 2013.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.