Datteln-Hamm Canal

The Datteln-Hamm Canal (German: Datteln-Hamm-Kanal) is a canal in the German state of North Rhine-Westphalia. It links the Dortmund-Ems Canal at Datteln to the city of Hamm.[1]

Datteln-Hamm Canal
Specifications
Length47.2 km (29 mi)
Geography
Start pointDortmund-Ems Canal at Datteln, Germany
End pointHamm, Germany
The Datteln-Hamm Canal at Bergkamen

The canal is 47.2 kilometres (29.3 mi) long and has two locks, at Hamm and Werries, with a total rise of 6.8 metres (22 ft).[1] In Hamm a water exchange facility of the Wasserverband Westdeutsche Kanäle is located that feeds the waterway with water out of the river Lippe to compensate evaporation, infiltration and operation of locks. When the water level of the river Lippe falls below a flow rate of 10 m³/second water out of the Datteln-Hamm Canal is pumped into the Lippe and the canal receives water via pumps from the Ruhr and Rhine.


History

Canal was constructed between 1906 and 1914 for heavily industrialized area. It has given a commercial navigation. It's one of the most important canals in Germany.[2]

gollark: Also using an "event bus".
gollark: I am inventing a "module system" and rearchitecting it in accordance with moderately FP practices.
gollark: Testbot, servers.
gollark: So where is polaris.apionet.irc?!
gollark: Testbot, servers.

References
  1. Sheffield, Barry (1995). Inland Waterways of Germany. St Ives: Imray Laurie Norie & Wilson. p. 48. ISBN 0-85288-283-1.
  2. "Ruhrgebiet Waterways | Datteln-Hamm-Canal | Wesel-Datteln-Canal | Rhein-Herne-Canal | River Ruhr | Germany | european-waterways.eu: Description of waters, Facilities, Travel Information". www.european-waterways.eu. Retrieved 2019-04-20.

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.