Cycles and fixed points

In mathematics, the cycles of a permutation π of a finite set S correspond bijectively to the orbits of the subgroup generated by π acting on S. These orbits are subsets of S that can be written as { c1, ..., cl }, such that

π(ci) = ci + 1 for i = 1, ..., l − 1, and π(cl) = c1.
16-bit Gray code permutation G
multiplied with the bit-reversal permutation B

G has 2 fixed points, 1 2-cycle and 3 4-cycles
B has 4 fixed points and 6 2-cycles
GB has 2 fixed points and 2 7-cycles
P * (1,2,3,4)T = (4,1,3,2)T

Permutation of four elements with 1 fixed point and 1 3-cycle

The corresponding cycle of π is written as ( c1 c2 ... cn ); this expression is not unique since c1 can be chosen to be any element of the orbit.

The size l of the orbit is called the length of the corresponding cycle; when l = 1, the single element in the orbit is called a fixed point of the permutation.

A permutation is determined by giving an expression for each of its cycles, and one notation for permutations consist of writing such expressions one after another in some order. For example, let

be a permutation that maps 1 to 2, 6 to 8, etc. Then one may write

π = ( 1 2 4 3 ) ( 5 ) ( 6 8 ) (7) = (7) ( 1 2 4 3 ) ( 6 8 ) ( 5 ) = ( 4 3 1 2 ) ( 8 6 ) ( 5 ) (7) = ...

Here 5 and 7 are fixed points of π, since π(5)=5 and π(7)=7. It is typical, but not necessary, to not write the cycles of length one in such an expression.[1] Thus, π = (1 2 4 3)(6 8), would be an appropriate way to express this permutation.

There are different ways to write a permutation as a list of its cycles, but the number of cycles and their contents are given by the partition of S into orbits, and these are therefore the same for all such expressions.

Counting permutations by number of cycles

The unsigned Stirling number of the first kind, s(k, j) counts the number of permutations of k elements with exactly j disjoint cycles.[2][3]

Properties
(1) For every k > 0 : s(k, k) = 1.
(2) For every k > 0 : s(k, 1) = (k − 1)!.
(3) For every k > j > 1, s(k, j) = s(k − 1,j − 1) + s(k − 1, j)·(k − 1)

Reasons for properties
(1) There is only one way to construct a permutation of k elements with k cycles: Every cycle must have length 1 so every element must be a fixed point.
(2.a) Every cycle of length k may be written as permutation of the number 1 to k; there are k! of these permutations.
(2.b) There are k different ways to write a given cycle of length k, e.g. ( 1 2 4 3 ) = ( 2 4 3 1 ) = ( 4 3 1 2 ) = ( 3 1 2 4 ).
(2.c) Finally: s(k, 1) = k!/k = (k − 1)!.
(3) There are two different ways to construct a permutation of k elements with j cycles:
(3.a) If we want element k to be a fixed point we may choose one of the s(k − 1, j − 1) permutations with k − 1 elements and j − 1 cycles and add element k as a new cycle of length 1.
(3.b) If we want element k not to be a fixed point we may choose one of the s(k − 1, j ) permutations with k − 1 elements and j cycles and insert element k in an existing cycle in front of one of the k − 1 elements.

Some values
  k   j  
1 2 3 4 5 6 7 8 9 sum
1 1   1
2 1 1   2
3 2 3 1   6
4 6 11 6 1   24
5 24 50 35 10 1   120
6 120 274 225 85 15 1   720
7 720 1,764 1,624 735 175 21 1   5,040
8 5,040 13,068 13,132 6,769 1,960 322 28 1   40,320
9 40,320 109,584 118,124 67,284 22,449 4,536 546 36 1 362,880
  1 2 3 4 5 6 7 8 9 sum

Counting permutations by number of fixed points

The value f(k, j) counts the number of permutations of k elements with exactly j fixed points. For the main article on this topic, see rencontres numbers.

Properties
(1) For every j < 0 or j > k : f(k, j) = 0.
(2) f(0, 0) = 1.
(3) For every k > 1 and k ≥ j ≥ 0, f(k, j) = f(k − 1, j − 1) + f(k − 1, j)·(k − 1  − j) + f(k − 1, j + 1)·(j + 1)

Reasons for properties

(3) There are three different methods to construct a permutation of k elements with j fixed points:

(3.a) We may choose one of the f(k − 1, j − 1) permutations with k − 1 elements and j − 1 fixed points and add element k as a new fixed point.
(3.b) We may choose one of the f(k − 1, j) permutations with k − 1 elements and j fixed points and insert element k in an existing cycle of length > 1 in front of one of the (k − 1) − j elements.
(3.c) We may choose one of the f(k − 1, j + 1) permutations with k − 1 elements and j + 1 fixed points and join element k with one of the j + 1 fixed points to a cycle of length 2.

Some values
  k   j  
0 1 2 3 4 5 6 7 8 9 sum
1 0 1   1
2 1 0 1   2
3 2 3 0 1   6
4 9 8 6 0 1   24
5 44 45 20 10 0 1   120
6 265 264 135 40 15 0 1   720
7 1,854 1,855 924 315 70 21 0 1   5,040
8 14,833 14,832 7,420 2,464 630 112 28 0 1   40,320
9 133,496 133,497 66,744 22,260 5,544 1,134 168 36 0 1 362,880
  0 1 2 3 4 5 6 7 8 9 sum

Alternate calculations

Example: f(5, 1) = 5×1×4! − 10×2×3! + 10×3×2! - 5×4×1! + 1×5×0!

= 120 - 120 + 60 - 20 + 5 = 45.

Example: f(5, 0) = 120 - ( 5×4! - 10×3! + 10×2! - 5×1! + 1×0! )

= 120 - ( 120 - 60 + 20 - 5 + 1 ) = 120 - 76 = 44.
For every k > 1:

Example: f(5, 0) = 4 × ( 9 + 2 ) = 4 × 11 = 44

For every k > 1:

Example: f(5, 0) = 120 × ( 1/2 - 1/6 + 1/24 - 1/120 )

= 120 × ( 60/120 - 20/120 + 5/120 - 1/120 ) = 120 × 44/120 = 44
where e is Euler's number ≈ 2.71828
gollark: Hold on, let me look at my political view calendar.
gollark: Well, they certainly exist.
gollark: the crumble harriage lord.
gollark: Go rotate 2*9* exabees.
gollark: I definitely remember it being possible to. I don't care enough to find a number theory book from my spare phone.

See also

Notes
  1. Gerstein 1987, p. 240
  2. Cameron 1994, p. 80
  3. Brualdi 2010, p. 290

References
  • Brualdi, Richard A. (2010), Introductory Combinatorics (5th ed.), Prentice-Hall, ISBN 978-0-13-602040-0
  • Cameron, Peter J. (1994), Combinatorics: Topics, Techniques, Algorithms, Cambridge University Press, ISBN 0-521-45761-0
  • Gerstein, Larry J. (1987), Discrete Mathematics and Algebraic Structures, W.H. Freeman and Co., ISBN 0-7167-1804-9
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.