Comparison of pumps

This article lists different types of pump and provides a comparison of certain key design features. Different types of pumps are suitable for different applications, for example: a pump's maximum lift height also determines the applications it can be used for. Low-lift pumps are only suitable for the pumping of surface water (e.g., irrigation, drainage of lands, ...), while high-lift pumps allow deep water pumping (e.g., potable water pumping from wells).[1]

Direct lift devices

Pump type Cyclic/continuous ? Maximum lift height Production cost Efficiency Output Size of device Fabrication requirements Difficulty of production Durability Difficulty of repair Suction lift ?
Continuous bucket pump continuous 5m-50m low-medium medium low-medium ? ? traditional ? ? no
Counterpoise lift or Shadoof cyclic 1m-4m low-medium low-medium low-medium ? ? traditional ? ? no
Mohte cyclic 3m-8m low-medium low medium ? ? traditional ? ? no
Persian wheel "Tablia" continuous 3m-10m low-medium medium medium ? ? traditional ? ? no
Persian wheel "Zawaffa" continuous 3m-15m medium medium-high medium-high ? ? traditional ? ? no
Pivoting gutters and "dhones" cyclic 1m-1,5m low-medium low-medium low-medium ? ? traditional ? ? no
Reciprocating bucket hoist cyclic 100m-500m medium-high medium medium-high ? ? industrial ? ? no
Rope & bucket and windlass cyclic 5m-50m very low very low very low ? ? basic ? ? no
Scoops and bailers cyclic >1m very low very low low-medium ? ? basic ? ? no
Scoop wheel "Sakia" continuous >2m medium-high medium-high medium-high ? ? traditional ? ? no
Swing basket cyclic >1m very low very low low-medium ? ? basic ? ? no
Waterwheels or noria continuous >5m low-medium low-medium low-medium ? ? traditional ? ? no
Watering car cyclic >3m very low very low very low ? ? basic ? ? no

Displacement pumps

Pump type Cyclic/continuous ? Maximum lift height Production cost Efficiency Output Size of device Fabrication requirements Difficulty of production Durability Difficulty of repair Suction lift ?
Archimedean screw continuous >2m medium medium medium-high ? ? industrial ? ? no
Chain (or rope) and washer pump continuous 3m-20m medium-high medium-high medium ? ? traditional ? ? no
Coil pump and spiral pump continuous >6m medium medium low-medium ? ? traditional ? ? no
Diaphragm pump cyclic 5m-10m medium medium-high medium ? ? industrial ? ? yes
Flash wheel and treadmill >2m low-medium low-medium medium-high ? ? ? traditional/industrial ? ? no
Flexible vane pump continuous 10m-20m medium-high medium medium ? ? industrial ? ? yes
Gas or vapour displacement pump cyclic 5m-50m medium medium medium-high ? ? industrial ? ? no/yes
Gear and lobe pump continuous 10m-20m medium low-medium very low ? ? industrial ? ? yes
Open screw pump continuous >6m high medium-high medium-high ? ? industrial ? ? no
Peristaltic pump continuous >3m medium medium very low ? ? industrial ? ? yes
Petropump continuous 10m-100m medium-high high low-medium ? ? industrial ? ? ?
Porous rope continuous 3m-10m ? ? low-medium ? ? industrial ? ? no
Progressive cavity pump (Moyno) continuous 10m-100m medium-high medium-high medium ? ? industrial ? ? no
Piston pump, bucket pump cyclic 2m-200m medium-high high medium ? ? traditional/industrial ? ? yes
Plunger pump cyclic 100m-500m high medium-high low-medium ? ? traditional ? ? yes
Pulser Pump cyclic 1-300m low-medium low low-medium small-huge ? traditional very high easy no
Semi-rotary pump cyclic 5m-10m low-medium low-medium low-medium ? ? industrial ? ? yes
Water ladder cyclic >2m medium medium medium ? ? traditional ? ? no

Velocity pumps

Pump type Cyclic/continuous ? Maximum lift height Production cost Efficiency Output Size of device Fabrication requirements Difficulty of production Durability Difficulty of repair Suction lift ?
Centrifugal (regenerative) pump continuous 10m-30m medium-high medium medium ? ? industrial ? ? yes
Centrifugal (turbine) pump continuous 3m-200m medium-high medium-high high ? ? industrial ? ? yes
Centrifugal (volute) pump continuous 3m-20m medium medium-high high ? ? industrial ? ? yes
Flap valve pump ? 2m-4m very low low-medium very low ? ? basic/traditional ? ? no
Inertia pump, joggle pump cyclic 2m-4m low-medium medium-high low-medium ? ? traditional, industrial ? ? no
Jet pump (water, air or stream) continuous 2m-20m medium low-medium low-medium ? ? industrial ? ? no
Mixed flow pump continuous 2m-10m medium-high medium-high high ? ? industrial ? ? no
Propeller (axial flow) pump continuous 5m-30m medium-high medium-high high ? ? industrial ? ? no
Rebound inertia cyclic 2m-60m medium medium-high very low ? ? industrial ? ? yes
Resonating joggle pump cyclic 2m-10m medium medium-high medium-high ? ? traditional ? ? no

Buoyancy pumps

Pump type Cyclic/continuous Maximum lift height Production cost Efficiency Output Size of device Fabrication requirements Difficulty of production Durability Difficulty of repair Suction lift ?
Airlift pump Continuous

(with collector)

5m-50m medium-high low-medium medium ? ? industrial ? ? no

Impulse Pumps

Pump type Cyclic/continuous ? Maximum lift height Production cost Efficiency Output Size of device Fabrication requirements Difficulty of production Durability Difficulty of repair Suction lift ?
Hydraulic ram cyclic 10m-100m medium low-medium low ? requires flowing water as power source (e.g. river) industrial high ? no

Note: reciprocating pumps are cyclic, rotary pumps are typically continuous.

gollark: No. I will. Not.
gollark: Ubgroducingt beds.
gollark: Alternatively, there just aren't that many people with the relevant skillsets who aren't doing other things, and none of them care about it/have gotten around to it.
gollark: Cheaper/easier personalization presumably.
gollark: I think people working on it are concerned about the potential for scams and such and are less willing to release models etc.

References

This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.