Chevron Solarmine

At the time of commissioning in 2003, the 500 kW Chevron Solarmine solar photovoltaic (PV) system was the world's largest thin-film amorphous silicon solar PV system and one of the largest solar PV systems in the United States.[1] Located at the Midway-Sunset Oil Field, Solarmine was the first solar PV system in California to power oil field operations.[1]

Chevron Solarmine
Chevron Solarmine System
CountryUnited States
LocationFellows, California
Coordinates35°11′1.6″N 119°32′22.4″W
StatusOperating
Owner(s)Chevron Corporation
Operator(s)Chevron Corporation
Solar farm
TypeFlat-panel PV
Site area6 acres
Power generation
Units operational500 kW
Nameplate capacity500 kW AC
Annual net output900,000 kWh AC

System

ChevronTexaco and United Solar Systems Corporation (Uni-Solar) collaborated on the design and installation of Solarmine.[1] At the time of commissioning in 2003, the 500 kW Chevron Solarmine solar photovoltaic (PV) system was the world's largest thin-film amorphous silicon solar PV system and one of the largest solar PV systems in the United States.[1] Located at the Midway-Sunset Oil Field, Solarmine was the first solar PV system in California to power oil field operations.[1]

The building block for the solar PV system is a Uni-Solar PV Laminate (Model PVL-128) that is about 1.3 feet wide by 18 feet long, providing 128 Watts DC.[1][2] The PV laminates have good performance in cloudy weather because they are designed to be less dependent on infrared light.[3] In addition, the PV laminates have increased tolerance to higher temperatures, shadows, and soiling.[2]

Solar PV Laminate Manufactured by United Solar Ovonic

The PV laminates are adhered to standing seam metal roof panels which are then attached to ground-mounted metal racks at 20 degree angles.[2] The PV laminates are electrically wired in series so that there are twelve 128 Watt PV laminates per string and the overall system has 400 strings, composed of 4,800 PV laminates, for a total of 614 kW DC.[2] The DC power output from the PV laminates is fed into combiner boxes and then two grid-tied inverters, one at 225 kW and the other at 300 kW.[2] The inverter output is fed into three-phase isolation transformers.[2] The system is connected to the local distribution grid.[3]

Technology

The PV laminates were manufactured using a roll-to-roll vapor deposition process that used less than 1/300th the amount of silicon material normally used in standard crystalline silicon solar cells.[2] There were three semiconductor layers deposited onto a 5-mil thick sheet of stanless steel.[2] The PV laminates are capable of capturing a greater percentage of incident light, which provides higher efficiencies and higher energy outputs, especially at lower irradiation levels and at low light.[2] In order to maintain the series circuit when the PV laminates are shaded or covered by dirt or dust, bypass diodes are installed across each solar PV cell.[2] The degradation of amorphous silicon PV panels have been evaluated at test labs globally and the annual degradation rate is approximately 0.87% power degradation.[4]

Operations

Solarmine generates about 900,000 kWh AC of electrical energy annually and is used for oilfield operations.[1][5] The operation of the system provided some important insights regarding system design, especially the assumptions used for estimating the system and conversion losses in going from DC to AC, including the losses due to interconnection, string mismatch, inverter, soiling, and thermal.[2] The original expected power was 490 kW AC, but due to the lower than expected losses, the system can provide regular output in excess of 500 kW AC.[2] After the first two years of operation, the system was determined to be able to deliver and exceed the annual energy production needed in order to provide required rate of return for the project economics.[2]

A data acquisition system has been collecting data from the site since July 2003 and data analysis has provided quantifications of system performance, as well as the effects of inverter breakdowns and soiling due to the dusty environment.[2]

Data analysis for 2008 system operations showed that the annual energy yield was 1653 kWh/kWp, which was aligned with predicted performance using the available solar calculators at the time for thin-film solar PV products.[6]

In 2009, the Milken Institute completed an analysis about the impact of Chevron on the California economy and Solarmine was mentioned as the first solar PV system in California to power oil field operations.[7]

At the 21st Joint Global Climate Change-Japan Environment Symposium in 2013, Solarmine was featured as a renewable energy system used in the petroleum industry since 2003.[8]

Thin-film PV laminate product
Monthly Energy Yields (kWh/kWp) for 2008[6]
Month Energy Yield (kWh/kWp)
January 71.3
February 109.5
March 153.0
April 176.4
May 174.5
June 188.9
July 183.9
August 179.7
September 153.6
October 123.6
November 87.8
December 51.0
Annual Total 1653
gollark: Yes. Find a speaker and have it make clicky noises when you type.
gollark: Antispaghetti is generally considered a dark chapter in foodological histology.
gollark: And destroyed the moon, so NASA had to fake landing there.
gollark: Well, we discovered moon aliens, so we gave them antispaghetti as a "gift", buuuut turns out it wiped them out.
gollark: Particle accelerators do produce a bit of antimatter, I think. It's been studied.

References
  1. "ChevronTexaco Installs California's First Solar Project To Power Oil Production | Chevron Corporation". chevroncorp.gcs-web.com. Retrieved 2020-06-13.
  2. Gregg, A.; Blieden, R.; Chang, A.; Ng, H. (2005). "Performance analysis of large scale, amorphous silicon, photovoltaic power systems". Conference Record of the Thirty-first IEEE Photovoltaic Specialists Conference, 2005. Lake Buena Vista, Florida: IEEE: 1615–1618. doi:10.1109/PVSC.2005.1488454. ISBN 978-0-7803-8707-2.
  3. Waldner, Erin (February 10, 2006). "Powered by sunshine". The Bakersfield Californian. Retrieved 2020-06-14.
  4. Jordan, Dirk; Kurtz, Sarah (June 2012). "Photovoltaic Degradation Rates — An Analytical Review" (PDF).
  5. Campbell, Laura (August 2007). "New Energy Horizons" (PDF). Next* Magazine. 2.
  6. Yang, Jeffrey; Guha, Subhendu (February 18–19, 2010). "Metastability of Amorphous Silicon Historical Perspective and Real-Life Performance" (PDF). Photovoltaic Module Reliability Workshop 2010, Technical Report NREL/TP-5200-60171, November 2013.
  7. Milken Institute (March 2009). "Energizing California: Mapping Chevron's Economic Impacts on the Golden State" (PDF).
  8. Al-Qattan, Ayman; Absi Halabi, Mamun (February 5, 2013). "Application of Renewable Energy in the Petroleum Industry" (PDF). 21st Joint GCC-Japan Environment Symposium.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.