Champion Freedom Falcon

The Champion Freedom Falcon is an American mid-wing, T-tailed, pusher configuration, single-seat motor glider that was designed and constructed by Ken Champion, first flying in 1982.[1][2]

Freedom Falcon
Role Motor glider
National origin United States
Designer Ken Champion
First flight 1982
Status Production completed
Number built one

Design and development

The Freedom Falcon was constructed with a wooden frame, covered with plywood and doped aircraft fabric covering. It mounts a 36 hp (27 kW) OMC Golden Phantom Wankel engine behind the cockpit, with the variable-pitch propeller above the tail boom. The 42 ft (12.8 m) span wing employs a Göttingen 549 airfoil and mounts spoilers for glidepath control.[1][3]

Only one example was completed and it was registered with the US Federal Aviation Administration in the Experimental - amateur-built category. FAA records indicate that the aircraft's registration expired on 30 June 2011 and was not renewed, so it is unknown whether the aircraft still exists.[1][2]

Specifications (Freedom Falcon)

Data from Sailplane Directory[1]

General characteristics

Performance

  • Maximum glide ratio: 26:1 at 48 mph (77 km/h)
  • Rate of sink: 156 ft/min (0.79 m/s)
gollark: `rust()`
gollark: Initiate Procedure 89.
gollark: ?star stats <@258639553357676545>
gollark: ?star stats
gollark: ?star STATS

See also

References
  1. Activate Media (2006). "Freedom Falcon Champion". Archived from the original on 29 August 2012. Retrieved 10 August 2011.
  2. Federal Aviation Administration (August 2011). "Make / Model Inquiry Results N110F". Retrieved 10 August 2011.
  3. Lednicer, David (2010). "The Incomplete Guide to Airfoil Usage". Archived from the original on 20 April 2010. Retrieved 1 July 2011.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.