Carveboarding

Carveboarding is a boardsport on hard surfaces (roads, sidewalks, etc.).
Carveboard is also the brand name of the board which popularized the practice of this sport.

The board was invented by Californian snowboarder & surfers (David Colley and Brad Gerlach) to practice their moves during flat sea days and summer. The result is a board that shares with the surfing, snowboarding, skateboard ride experience. And although by its anatomy (a board, 2 trucks, 4-wheel) the carveboard looks somewhat like its cousins skateboards, the handling and feel are ultimately much closer to those of surfing and snowboarding. Joe Gerlach, Brad's father, started Carve Board Sports based on the design.

The practice reminds of, better known, longboarding. However, it emphasizes the work of the turn for which it provides all the variations of the carve. Some models are equipped with pneumatic (air filled) tires, so use on rougher surfaces (asphalt, pavement, hard earth, etc.) is also possible.

Anatomy

The board itself has the distinction of being connected to the trucks by small hinges that allow to tilt the board relative to the horizontal. Thus, the board can tilt up to about 45 °; much more than conventional skateboard trucks. This allows a much more aggressive turn attack, limiting the speed loss in each curve (carving).

The possibility of instantaneous change of edge (Rail To Rail), allows to gain speed by flexion-extension as found in "shortboard" surfing and snowboarding. This is the "carving" effect that allows the development of necessary skills to advance one's surfing and snowboarding.

Emulation of other boardsports

Like skateboarding in its infancy, carveboarding seeks to give some specific sensations from surfing. These are also found in some practices of snowboarding (which is no surprise given the history of the latter). That is why today carveboards are sold on the quality of their emulation of surfing and snowboarding. But let there be no mistake, they are not necessarily noticeable to all, because they only relate to the carving practices of alpine and freeride snowboarding. Moreover, unlike the freebord and T-board, which have been specifically developed to emulate skateboard type of snowboarding, the carveboard was developed by a surfer/snowboarder for surfers/snowboarders. To put an end to sterile debates that inevitably arise around these competitive new boardsports offers, let's just remember that in essence emulating surfing or snowboarding on hard surface will always be imperfect. Top surfers and snowboarders use the carve board unique characteristics as a training tool when there are no waves or snow. We can thus assume that over time, like skateboarding, these sports will transcend their origins and establish themselves as separate sports and not more or less successful emulations.

Popularity

Although this relatively innovative idea is fairly new, the popularity and practice of carveboarding remains limited compared to longboarding. This can be explained by the fact that the latter was created in conjunction with skateboarding (in the 1970s), and has had time to develop. Like so many of the similar boardsports, the experience of riding the board is the key selling point. As mentioned, it is used frequently as a training tool. Also, the price of innovative board designs such as the carveboard remains high due to lack of competition in particular (only a very limited number of manufacturers have the patent), limiting its adoption by the masses.

gollark: SOME PEOPLE LIKE SOME CB COMMONS.
gollark: WHAT WAS IT?
gollark: Amazingly, the name Upgoer was free.
gollark: Doubt it. Market price is 100 shards.
gollark: In that case, kill it as an example to the others.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.