Brookland School District

Brookland School District is a public school district based in Brookland, Arkansas, United States. The Brookland School District provides early childhood, elementary and secondary education for more than 1,970 prekindergarten through grade 12 students at its five facilities within north-central Craighead County, Arkansas.

Brookland School District
Location
200 West School Street
Brookland, Arkansas 72417

United States
District information
GradesPK–12
SuperintendentKeith McDaniel
AccreditationAdvancED
Schools5[1]
NCES District ID0503640[1]
Students and staff
Students1,970 [1]
Teachers142.50 (on FTE basis)[1]
Student–teacher ratio14.51[1]
Athletic conference4A Region 3 (2012–17)
District mascotBearcat
Colors     Red      Black
Other information
Websitebrooklandbearcats.org

Brookland School District is accredited by the Arkansas Department of Education (ADE) and AdvancED.[2]

Schools

Secondary schools

  • Brookland High School—serving more than 450 students in grades 10 through 12.
  • Brookland Junior High School—serving more than 450 students in grades 7 through 9.
  • Brookland Middle School—serving more than 550 students in grades 3 through 6; receives Title I funding.

Elementary schools

  • Brookland Elementary School—serving more than 500 students in kindergarten through grade 2; receives Title I funding.
  • Brookland Pre-kindergarten serving more than 150 students.
gollark: <@498244879894315027> Why wouldn't (shouldn't?) they have a URL?
gollark: They do have to spin pretty fast. There are sealed helium ones now.
gollark: > The HDD's spindle system relies on air density inside the disk enclosure to support the heads at their proper flying height while the disk rotates. HDDs require a certain range of air densities to operate properly. The connection to the external environment and density occurs through a small hole in the enclosure (about 0.5 mm in breadth), usually with a filter on the inside (the breather filter).[124] If the air density is too low, then there is not enough lift for the flying head, so the head gets too close to the disk, and there is a risk of head crashes and data loss. Specially manufactured sealed and pressurized disks are needed for reliable high-altitude operation, above about 3,000 m (9,800 ft).[125] Modern disks include temperature sensors and adjust their operation to the operating environment. Breather holes can be seen on all disk drives – they usually have a sticker next to them, warning the user not to cover the holes. The air inside the operating drive is constantly moving too, being swept in motion by friction with the spinning platters. This air passes through an internal recirculation (or "recirc") filter to remove any leftover contaminants from manufacture, any particles or chemicals that may have somehow entered the enclosure, and any particles or outgassing generated internally in normal operation. Very high humidity present for extended periods of time can corrode the heads and platters. https://en.wikipedia.org/wiki/Hard_disk_drive#Integrity
gollark: Interweb says it's to keep pressure equalized between the inside and out.
gollark: Ah yes, destroy it as an example to the others.

References


This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.