Bromocresol green

Bromocresol green (BCG) is a dye of the triphenylmethane family (triarylmethane dyes). It belongs to a class of dyes called sulfonephthaleins.[4] It is used as a pH indicator in applications such as growth mediums for microorganisms and titrations. In clinical practise, it is commonly used as a diagnostic technique. The most common use of Bromocresol green is to measure serum albumin concentration within mammalian blood samples in possible cases of kidney failure and liver disease.

Bromocresol green
Names
IUPAC name
2,6-Dibromo-4-[7-(3,5-dibromo-4-hydroxy-2-methyl-phenyl)-9,9-dioxo-8-oxa-9λ6-thiabicyclo[4.3.0]nona-1,3,5-trien-7-yl]-3-methyl-phenol
Other names
3,3′,5,5′-Tetrabromo-m-cresolsulfonphthalein
Bromcresol green
Identifiers
3D model (JSmol)
Abbreviations BCG
ChEMBL
ChemSpider
ECHA InfoCard 100.000.885
EC Number
  • 200-972-8
UNII
Properties
C21H14Br4O5S
Molar mass 698.01 g·mol−1
Appearance Beige to brown powder
Odor Odorless
Melting point 225 °C (437 °F; 498 K) decomposes[1]
Sparingly soluble
Solubility in other solvents Soluble in benzene; very soluble in ethanol and diethyl ether[2]
Acidity (pKa) 4.90[3]
UV-vis (λmax) 423 nm[1]
Hazards
GHS pictograms
GHS Signal word Warning
GHS hazard statements
 H315, H319, H335
NFPA 704 (fire diamond)
Flammability code 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilHealth code 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformReactivity (yellow): no hazard codeSpecial hazards (white): no code
1
2
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Y verify (what is YN ?)
Infobox references
Bromocresol green (pH indicator)
below pH 3.8 above pH 5.4
3.8 ⇌ 5.4

Properties
From left to right solutions of 0.1 M HCl, 3 buffer solutions of pH 3.78, 3 of pH 4.00, 3 of pH 4.62 and NaOH 0.1 M after adding different amounts of bromocresol green (more in darker solutions)

In aqueous solution, bromocresol green will ionize to give the monoanionic form (yellow), that further deprotonates at higher pH to give the dianionic form (blue),[5] which is stabilized by resonance:

The acid dissociation constant (pKa) of this reaction is 4.8.[6] Tap water is sufficiently basic to give a solution of bromocresol green its characteristic blue-green color.[7]

Absorbance spectrum of bromocresol green at different pH values. The isosbestic point occurs where the acid and basic forms and mixtures thereof have the same absorbance

The acid and basic forms of this dye have an isosbestic point in their UV-Visible spectrum, around 515 nm, indicate that the two forms interconvert directly without forming any other substance.

An ethanol solution (0.04 wt%) of bromocresol green has been proposed for TLC staining and is suitable for visualisation of the compounds with functional groups whose pKa is below 5.0 (carboxylic acids, sulfonic acids, etc.). These appear as yellow spots on a light or dark blue background; no heating is necessary. Bromophenol blue solution can be used for the same purpose.

The compound is synthesized by bromination of cresol purple (m-cresolsulfonphthalein).

Uses

It is used as a pH indicator and as a tracking dye for DNA agarose gel electrophoresis. It can be used in its free acid form (light brown solid), or as a sodium salt (dark green solid). It is also an inhibitor of the prostaglandin E2 transport protein. Additional applications include use in sol-gel matrices,[8] the detection of ammonia,[9] and the measurement of albumin in human plasma and serum.[10]

Safety

Bromocresol green may cause irritation. Skin and eye contact should be avoided.

gollark: It was a genius innovation.
gollark: Just use thiserror?
gollark: Is logic Macron?
gollark: Lifetimes are just linear types, *actually*.
gollark: Very easily, thanks to the GTech™ high-performance cloud daring offload™ service.

References
  1. "Bromocresol Green". Sigma Aldrich.
  2. http://chemicalland21.com/specialtychem/finechem/BROMOCRESOL%20GREEN.htm
  3. Kolthoff, I.M. Treatise on Analytical Chemistry, New York, Interscience Encyclopedia, Inc., 1959.
  4. Sabnis, R. W. (2008). Handbook of Acid-Base Indicators. Boca Raton, FL: CRC Press. pp. 43–44.
  5. Fred Senese. "Acid-Base Indicators". Frostburg State University Dept. of Chemistry.
  6. Diamond, D.; Lau, K. T.; Brady, S.; Cleary, J. (2008). "Integration of analytical measurements and wireless communications—Current issues and future strategies". Talanta. 75 (3): 606–12. doi:10.1016/j.talanta.2007.11.022. PMID 18585121.
  7. Anonymous. Bromocresol Green. In The Merck index : an encyclopedia of chemicals, drugs, and biologicals; Windholz, M., Ed.; Merck & Co., Inc.: Rahway, N.J., 1983; pp 191.
  8. Zaggout, Farid R. (2005-11-01). "Encapsulation of Bromocresol Green pH Indicator into a Sol‐Gel Matrix". Journal of Dispersion Science and Technology. 26 (6): 757–761. doi:10.1081/DIS-200063087. ISSN 0193-2691.
  9. Hoang, Anh Tuan; Cho, Yeong Beom; Park, Joon-Shik; Yang, Yoonseok; Kim, Yong Shin (2016-07-01). "Sensitive naked-eye detection of gaseous ammonia based on dye-impregnated nanoporous polyacrylonitrile mats". Sensors and Actuators B: Chemical. 230 (Supplement C): 250–259. doi:10.1016/j.snb.2016.02.058.
  10. "BCG (Bromocresol Green) Albumin Assay Kit" (PDF). Sigma Aldrich. 2014.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.