Bloomington Ferry Bridge

The Bloomington Ferry Bridge is a 1.1-mile-long (1.8 km) freeway bridge across the Minnesota River between Bloomington, Minnesota and Shakopee, Minnesota that carries U.S. Route 169 (US 169).[1] The current bridge and the US 169 Shakopee Bypass were both completed in 1996. The bridge it replaced was designated Hennepin County Road 18 and Scott County Road 18.

Bloomington Ferry Bridge
Coordinates 44°47′55″N 93°23′56″W
Carries US 169
CrossesMinnesota River
LocaleBloomington, Minnesota
Named forBloomington
Characteristics
Total length1.1 miles (1.8 km)
History
Construction end1996 (1996)
ReplacesHennepin County Road 18

Bridge history

In 1849, the Bloomington Ferry began operation across the Minnesota River, providing service until the first Bloomington Ferry Bridge was built in 1889 at the site of the current Bloomington Ferry Trail Bridge.[2] This bridge remained in service until the late 1970s, when the bridge was replaced by a temporary 2-lane vehicle bridge. This second bridge remained in service until the third and current bridge was built approx. 0.75 miles (1.21 km) upstream. This current bridge was built in 1996 to avoid the flooding issues that plagued the previous two bridges due to the road on the Scott County side of the bridge lying along the riverbank.

gollark: https://pastebin.com/RM13UGFa L479
gollark: [DATA EXPUNGED]
gollark: PotatOS has a bunch of random bits of spaghetti for obfuscation. There's a 6KB compressed blob of Lua bytecode hooked into the incident reports module.
gollark: Or just don't write it.
gollark: Clever.

See also

References
  1. Bloomington Ferry Bridge, Eden Prairie, MN
  2. Bloomington History Packet [v5 Archived March 11, 2007, at the Wayback Machine
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.