Anthony Michell

Anthony George Maldon Michell FRS[1] (21 June 1870 – 17 February 1959) was an Australian mechanical engineer of the early 20th century.

Anthony Michell
Born
Anthony George Maldon Michell

(1870-06-21)21 June 1870
Died17 February 1959(1959-02-17) (aged 88)
AwardsFellow of the Royal Society[1]

Early life

Michell was born in London while his parents were on a visit to England from Australia to which they had emigrated 17 years earlier. The family returned to Maldon, Victoria, in 1872, where young Anthony attended one of the state primary schools newly established in that area. He later returned to England and attended the Perse Grammar School while his elder brother, John Henry, attended Trinity College, Cambridge. On leaving school, A.G.M. Michell matriculated and spent one year as a non-collegiate student at Cambridge.[2] In 1889, he returned to Australia and studied civil engineering at the University of Melbourne, graduating in 1895. For the next two years he obtained practical experience in structural engineering with the firm Johns and Waygood. He then returned to University, and completed a Master of Civil Engineering degree in 1899. The next few years were spent in hydraulic engineering and it was not until the early 1900s that he turned his attention to the theory of lubrication.

The Michell bearing
Exploded view of a Michell type thrust bearing. Note, each sector shaped pad can pivot on the ridges on the lower plate

The Michell principle, previously known as film lubrication, was originally observed and investigated by Beauchamp Tower and Osborne Reynolds. Several years elapsed before their theories were put into practice by A.G.M. Michell, who first showed how it was possible to apply film lubrication to flat thrust surfaces and journal bearings, the result being the now widely known and universally adopted Michell bearing.[3] Arising from Michell's research work on the mechanical properties of liquids and the mathematical studies of fluid motion viscosity and lubrication, a patent was taken out in England and Australia on 16 January 1905. In a few years his invention completely revolutionised thrust bearing technology, particularly in the field of marine propulsion and steam turbines.

The company of Michell Bearings Limited was established in Newcastle upon Tyne, England, in 1920. Principal shareholders at that time were Vickers, Fairfield Rowan, John Brown Engineering and Cammell Laird.

Structural optimisation

In 1904 Michell published a paper on structural optimisation[4] which is widely considered to be the seminal paper in the discipline. Unfortunately activity in this area only started to gain momentum some half century later, with the advent of electronic computers, and during his lifetime Michell would have been oblivious to the impact of his work in this field. Today optimal structures are often called Michell trusses or Michell frames

Crankless Engines (Aust) Pty Ltd

In 1920 Michell formed the Crankless Engines company[5][6] to develop and manufacture engines with an intriguing design that eliminated the crankshaft found in most automotive and stationary engines. The engines did not require connecting rod and bearings found in most engines and as such could be lighter and more compact.

Two notable employees of the firm were T.L Sherman who held U.S. Patent 2,475,295 on the crankless mechanism, and Phil Irving who would much later become a famed Australian motorcycle and racing engineer.

Crankless Engines was placed in receivership in February 1945.[5]

Later years

In May 1934, Michell was elected a Fellow of the Royal Society in the first year of his nomination.[1][7] In 1938, he received the Kernot Memorial Medal from the University of Melbourne, which was awarded for distinguished engineering achievement in Australia. He was the recipient of the James Watt International Medal in 1942 on the nomination of the Institution of Engineers (Australia), the Engineering Institute of Canada, and the South African Institution of Engineers.

In 1950, at the age of eighty, Michell published his fine book on lubrication. Of distinctive style, the book is wide-ranging yet concise, original and thorough, and provides a good starting point for students of the subject.

Anthony George Maldon Michell was a bachelor and lived in Prospect Hill Road, Camberwell, until his death in 1959 at the age of eighty-eight.

gollark: Names are not universally unique.
gollark: It is not unique.
gollark: `kmk7hQCj5gB77sCJ-euwH` is a *good* NanoID. SPUDNET uses them for keys.
gollark: 8 chars or whatever doesn't have enough entropy.
gollark: No, I was curious.

References
  1. Cherry, T. M. (1962). "Anthony George Maldon Michell. 1870-1959". Biographical Memoirs of Fellows of the Royal Society. 8: 90–103. doi:10.1098/rsbm.1962.0007.
  2. "Michell, Anthony George Maldon (MCL888AG)". A Cambridge Alumni Database. University of Cambridge.
  3. Hyde, J. H. (1922). Lubrication and Lubricants, p. 68-75. London: Sir I. Pitman & Son.
  4. Michell, A. G. M. (1904) The limits of economy of material in frame-structures, Philosophical Magazine, Vol. 8(47), p. 589-597.
  5. "Photograph - Crankless Engines (Australia) Pty Ltd, Uniflow Condensing Steam Engine, Fitzroy, Victoria, 1921". Retrieved 24 May 2019.
  6. http://adb.anu.edu.au/biography/michell-anthony-george-maldon-7567
  7. "Library and Archive". The Royal Society. Retrieved 2 October 2010.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.