Alternate Instruction Set

The Alternate Instruction Set (AIS) is a second 32-bit instruction set architecture found in some x86 CPUs made by VIA Technologies. On these VIA C3 processors, the second hidden processor mode is accessed by executing the x86 instruction ALTINST (0F 3F). If AIS mode has been enabled, the processor will perform a JMP EAX[1] and begin executing AIS instructions at the address of the EAX register. Using AIS allows native access to the Centaur Technology-designed RISC core inside the processor.[2]

Instruction format
Register mapping between AIS and x86
AIS number x86 name
R0EAX
R1ECX
R2EDX
R3EBX
R4ESP
R5EBP
R6ESI
R7EDI
R8‒R15…

The manufacter describes the Alternate Instruction Set as "an extended set of integer, MMX, floating-point, and 3DNow! instructions along with additional registers and some more powerful instruction forms".[1] Every AIS instruction is prefixed with the 3-byte sequence 0x8D8400 followed by the 32-bit instruction; this prefix form for the AIS instructions makes them appear to be x86 Load Effective Address (LEA) instructions. In 2018 researcher Christoper Domas reported that the prefix 0x620405 (x86 BOUND) also worked.

A proposal made in 2002 to add AIS support to the Netwide Assembler (NASM) was partially declined in 2005, on the basis that NASM was an x86 assember, and AIS is a separate instruction set.[3] An assembler is available from Domas's 2018 research.[4]

In 2007 a patent named some microcode instructions as load and store to/from main RAM, and loadPRAM and storePRAM to/from private-RAM inside the processor.[5] The Centaur Technologies verification team, in a 2014 paper about the VIA Nano, included some short lists of micro-instructions including ADDIG, JLINK, JMP_ALL, MVIG, NLOOPE, STORE_PRAM, plus micro-operations XADD and XSUB. Micro-operations were shown to have a format that includes the fields opcode, exec unit, src width, src1, src2, dest width, dest, write flags? and end routine?.[6]

Availability

From x86 mode, the availability of the Alternate Instruction Set can be detected by executing a CPUID with the EAX register set to 0xc0000001 and then examining the EDX register. If EDX bit 0 is set to 1, then AIS is supported. If EDX bit 1 is also set to 1, then AIS is enabled.[7] If AIS is supported by the CPU, then its status can be checked and altered through the Model-specific registers, by checking and setting the Feature Control Register (FCR, register 0x1107). If bit 0 ("ALTINST") is set to 1, then AIS is enabled.[7]

The Microsoft Windows NT kernel KiGetFeatureBits() initialisation function proactively disables Alternate Instruction mode on boot up.[8] If the x86 ALTINST jump instruction is executed when AIS mode is disabled, then the processor will generate an Invalid Instruction exeception.[9] Setting the AIS-enabled bit requires privileged access, and should be set using a read-modify-write sequence.[9]

Privilege elevation

In 2018 Christopher Domas discovered that some Samuel 2 processors came with the Alternate Instruction Set enabled by default and that by executing AIS instructions from user space, it was possible to gain privilege escalation from Ring 3 to Ring 0.[4] Domas had partially reverse engineered the AIS instruction set using automated fuzzing against a cluster of seven thin clients.[10] Domas used the terms "deeply embedded core" (DEC) plus "deeply embedded instruction set" (DEIS) for the RISC instruction set, "launch instruction" for ALTINST, "bridge instruction" for the x86 prefix wrapper, "global configuration register" for the Feature Control Register (FCR), and documented the privilege escalation with the name "Rosenbridge".[4]

gollark: I still can't see it.
gollark: Yes.
gollark: Actually, the "Take me back to the simpler Pre-overhaul times" button appears to not exist.
gollark: Ah, never mind.
gollark: How do I get it to generate non-overhaul ones?

References
  1. Alternate Instruction Set (PDF). VIA Eden (Report). Embedded System Platform Processor Datasheet. November 2002. p. 70‒71. Retrieved 10 August 2018.
  2. Stiller, Andreas (22 January 2003). "VIAs Prozessor der siebten Generation" [VIA's seventh-generation processor]. Heise Online (in German). Heinz Heise. Retrieved 12 August 2018. Als … kann man Nehemiahs RISC-artigen Core auch native programmieren (AIS: Alternate Instruction Set). Auch hier wird sich zeigen, ob findige Programmierer das für den einen oder anderen Treiber nutzen können, um hier mehr Performance herauszukitzeln.
  3. "#21 add support for Centaur's AIS". The Netwide Assembler. 18 December 2002. Retrieved 12 August 2018 – via Sourceforge.
  4. Domas, Christopher. "Rosenbridge: Hardware backdoors in x86 CPUs". Retrieved 10 August 2018.
  5. US patent 20080256336A1, Henry, G. Glenn; Colin Eddy & Rodney E. Hooker et al., "Microprocessor with private microcode ram", published 2008-10-16, issued 2010-11-02
  6. Davis, Jared; Slobodova, Anna; Swords, Sol (20 April 2016). "Microcode Verification – Another Piece of the Microprocessor Verification Puzzle" (PDF). Retrieved 14 August 2018. Cite journal requires |journal= (help)
  7. Centaur Extended CPUID Instruction Functions (PDF). VIA Eden-N Embedded System Platform Processor Datasheet (Report). 22 October 2004. p. 20, 74. Retrieved 10 August 2018.
  8. Microsoft. "kernlini.c". Microsoft Windows NT kernel source. Retrieved 14 August 2018. KiGetFeatureBits() … // Disable bit 0 which controls the Cyrix ALTINST feature.
  9. Alternative Instruction Execution (PDF). VIA C3 Samuel 2 Processor Datasheet (Report). October 2004. p. 60.
  10. Wagenseil, Paul (9 August 2018). "Hacker Finds Hidden 'God Mode' on Old x86 CPUs". Tom's Hardware. Retrieved 10 August 2018.

Further reading
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.