Allentown Bridge

The Allentown Bridge is a bridge spanning the Puerco River near Houck, Arizona, located in Apache County. The existing structure was completed in 1923 and is listed on the National Register of Historic Places.

Allentown Bridge
Allentown Bridge
LocationPuerco River, Houck, Arizona
Coordinates35°16′50″N 109°09′19″W
Built1923
ArchitectMidland Bridge Company
Architectural stylesteel rigid-connected PFan deck tma
NRHP reference No.88001617[1]
Added to NRHPSeptember 30, 1988[2]

History

In 1922, a major upgrading of the highway between Adamana and the Arizona state line with New Mexico. As part of this upgrade, bridges were proposed to cross the Puerco River, near the Indian settlements of Allentown and Sanders, as well as a smaller structure over the Lupton Arroyo near Lupton. Without the bridges over the Puerco, vehicles had to wait for waters to subside to a point where they could ford the river. The wait could reach up to 24 hours.

AHD engineered a design for the structures, the design for the bridge near Allentown called for a medium-span deck truss with twenty-foot cantilevered ends. On January 1, 1923 AHD announced bids for all three structures. A Denver construction company, the Midland Bridge Company, was awarded the contract for the Allentown bridge. At a total cost of $11,675, funding was supplied from an Apache County bond issue as well as money from the state road fund. Construction began on January 17 and was completed on July 11. After completion, this stretch of highway would become part of the road later designated U.S. Highway 66.

Due to a realignment of U.S. 66 in 1931, the Allentown bridge, along with the Sanders bridge, were no longer on the route. Today the bridge only carries local traffic on the Navajo Nation.[3]

Structure

The substructure of the bridge consists of concrete abutments and solid concrete piers, while the superstructure is made of a riveted steel 9-panel Pratt deck truss, with both its ends cantilevered. There are steel lattice guardrails, with timber stringer/pile approach spans on both sides. It is a single span of 90 feet in length and 15.2 feet in width, with a total length of 206 feet.[4] On September 30, 1988, the bridge was listed on the National Register of Historic Places.[2] It is one of the earliest bridges with a deck truss design which was built by the State Engineer and, with the Little Hell Canyon Bridge, is one of the two earliest deck truss bridges in the state. The cantilevered ends are unique in Arizona among trusses built for vehicular process.[3]

See also

Notes

    References

    1. "National Register Information System". National Register of Historic Places. National Park Service. July 9, 2010.
    2. "Allentown Bridge". National Park Service. Archived from the original on January 16, 2017. Retrieved January 14, 2017.
    3. Historic Bridge Inventory (PDF). State of Arizona. pp. 236–39. Retrieved January 14, 2017.
    4. "HABS/HAER Inventory". National Park Service. Retrieved January 14, 2017.
    This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.