AN-M8 smoke grenade

The AN-M8 HC Smoke Grenade designated as the Army/Navy Model 8 HC Smoke Grenade (AN-M8 Smoke HC) is a US military grenade used as a ground-to-ground obscuring or screening device or a ground-to-air signaling or target-marking device.[1][2]

Drawing of AN-M8 smoke grenade

History

Developed in the 1940s, using a sheet-steel cylinder body that can emit a dense cloud of white smoke that would last from 105 to 150 seconds.

The AN-M8 was used extensively by American or other allied forces used throughout World War II to the 1990s. As of the September 2000 version of FM 3-23.30 Grenades and Pyrotechnic Signals, the AN/M8 was listed as obsolete.

Details

It is used for smoke screening, target marking, and signalling, although the M18 colored smoke grenades are mainly used for the latter.

Army/Navy Model 8 HC Smoke Grenade (AN-M8)
Color/Markings light green body with black markings and a white top
Body Sheet steel cylinder
Fuze assembly M201A1 Pull-ring Igniter. A "mouse trap" type igniting fuze with a 1.2 to 2.0 second delay. Ignition ignites the filler and expels it from the grenade body
Filler 19 ounces of Type C, hexachloroethane (HC smoke) mixture
Weight 24 ounces (680 g)
Safety clip? No
Range Can be thrown 30 feet by an average soldier before it ignites. It can be thrown further while igniting in flight
Duration The grenade emits a dense cloud of white or gray smoke that lasts for 105 to 150 seconds (1.75 to 2.5 minutes)

Warning

  1. The AN-M8 hand grenade produces harmful hydrochloric fumes that irritates the eyes, throat, and lungs. It should not be used in closed-in areas unless the users are wearing protective masks.[2]
  2. With both the AN-M8 and AN M18, there is danger of starting a fire if it is used in a dry area. The steel casing can be heated by the hot chemical reaction, which can ignite flammable materials (like trash or dry vegetation) nearby.

Field Instructional Use

When employing the M18 or AN-M8 HC hand grenade, it may be desirable to use one of these grenades without the fuze. To do this, the following procedure should be used in combat only:

  1. Remove the tape from grenade bottom to expose the filler.
  2. Remove the fuze by unscrewing it from the grenade.
  3. Ignite starter mixture with open flame.
  4. Immediately throw the grenade to avoid burn injury.

Toxicity

The HC smoke of the M8 is more toxic than that of the M18 grenade. The fumes comprise an acidic smoke of zinc chloride (ZnCl2), which produces hydrochloric acid on contact with water.[3]

See also

References

  1. "AN-M8 HC White Smoke grenade". Federation of American Scientists.
  2. "Smoke Grenades". Army Study Guide.
  3. "Appendix E: Smoke And Masking Agents" (PDF). Australian Department of Veteran Affairs. December 2003. p. E-3. Archived from the original (PDF) on 2014-02-13. Retrieved 2012-10-04.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.