Windows 10 Upgrade Fails - 8007002C-4000D

1

1

An annoying issue - I've done a lot of research into this issue, and the best thread I've found is over at Reddit.

I've tried unplugging every USB peripheral except Keyboard/Mouse, uninstalling Microsoft Security Essentials, doing it from a Clean Boot and disabling all network adapters - and it still fails at about 50% of configuring settings.

If anyone's got anymore advice, that'd be great.

I'm running a SSD with a 1TB Hard Disk.

UPDATE (27/09/2015): I've still had no success with this upgrade, even after trying the ISO upgrade.

Tim Coysh

Posted 2015-09-23T14:03:14.083

Reputation: 21

Answers

2

Windows 10 Upgrade Error 8007002C-4000D

0x8007002C-0x4000D

Attempt the same solutions used for error code 0xC1900101-0x4000D

...

0xC1900101-0x4000D

The installation failed in the SECOND_BOOT phase with an error during MIGRATE_DATA operation

  • Disable (preferrably uninstall) your Antivirus utility before attempting the upgrade.
  • Disable General USB Devices (example - Smart Card Reader).
  • Do a clean boot and try again.
  • If you are upgrading using the .ISO file, disconnect from the Internet during setup, if you are connected by LAN (Ethernet) or Wi-Fi, disable both and attempt setup again.
  • If you are updating through Windows Update, when the download reaches 100% disconnect from the Internet LAN (Ethernet) or Wi-Fi and proceed with the installation.
  • If that does not work, try using the .ISO file to upgrade if possible.
  • If you are connected to a domain, switch to a local account
  • If you have any external devices attached to the machine, disconnect them (example, USB keys, external hard disk, printers, non-essential devices).

How to: upgrade from previous versions of Windows using Windows 10 ISO file

How to download official Windows 10 ISO files

Source How to: Troubleshoot common Setup and Stop Errors during Windows 10 Installation

DavidPostill

Posted 2015-09-23T14:03:14.083

Reputation: 118 938

I couldn't find an upgrade ISO anywhere, but apart from that I've done all the steps. – Tim Coysh – 2015-09-23T19:32:11.763

@Tjcrazy How to download official Windows 10 ISO files will give you a Windows 10 ISO. The ISO can be used to first upgrade (see How to: upgrade from previous versions of Windows using Windows 10 ISO file) and then later perform a clean install if you want.

– DavidPostill – 2015-09-23T19:35:51.510

@Tjcrazy Both links are already in the answer :/ – DavidPostill – 2015-09-23T19:38:54.977

just tried from the ISO upgrade, and again it failed with the same error code – Tim Coysh – 2015-09-24T12:59:01.937

@Tjcrazy Did you "disconnect from the Internet during setup, if you are connected by LAN (Ethernet) or Wi-Fi, disable both and attempt setup again." as instructed? – DavidPostill – 2015-09-24T13:01:45.010

yes - disabled all network adapters – Tim Coysh – 2015-09-24T13:10:55.287

Asked: 2015-09-23T14:03:14.083

Viewed: 4 809 times

Active: 2015-09-26T22:59:15.677