1
I have a Zywall USG 20 using IPsec. It works and connects fine however I can only access the zywall its self. Traffic does not route to other computers on the subnet. In my case I need to access linux and windows shares. Not sure if I have my subnets setup incorrectly or my vpn client configured incorrectly. I used both ipsecuritas and vpntracker (osx client) and identical results. I could access the zywall but not the computers on the subnet. I have been at this for hours so im sure its something simple im over looking but im not sure what I should provide. Client and Remote use different subnets, im connecting via IP not domain names. Zywall zone policy is the same as the computers on the subnet. I cant ping anything but the zywall. I cant force all my traffic over the vpn however I dont know IPSec well enough to know if my hardware can support it. Would prefer that since its intended for a travel laptop. Advice?
Enpoints set in ipsecuritas: Local side, Mode: Auto (tried host and forcing an ip as well) Remote side, Network, 10.2.0.0/24
Client subnet is: 10.0.0.1/24 Remote subnet is: 10.2.0.0/24
Ryan Mills
Posted 2015-04-14T23:27:48.347
Reputation: 143