2
1
I have just applied an image of a Windows 7 Embedded system to a HDD using Imagex inside WinPE. I captured the image of the system on the same board and the same drive and cleaned the drive before applying the image so it's the same system I am applying to. Windows is x64 and WinPE and imagex are amd64. This is from Windows Automated Instillation Kit version 2.0.0.0.
I am trying to place the image on a partitioned data drive which was set as active. After applying the image I know the boot files are not applied as I get the message "BOOTMGR is missing" after rebooting. In WinPE I tried
D:\Windows\System32>bcdboot d:\windows /s c:
The error I get when I try and load the boot files this way is:
BFSVC: Failed to create a new system store. Status = [c000003a]
Additional info: If I look into Windows\Boot\EFI It contains bootmgr.efi and a few other efi files.
Many thanks for reading
Hi, I had this problem because my HDD was installed in bios legacy mode and I was booting the windows install CD in UEFI mode. When I rebooted on the CD in the bios legacy mode, the
bcdboot
command succeeded. – SebMa – 2018-12-18T12:54:30.453