0
I have got Lenovo Thinkpad w540 and running Mint 16. When I dock the laptop into the docking station, everything freezes. I have to undock and wait until the login window is loaded. How should I go along about finding out what is wrong?
What I found out so far was the following. I ran the xrandr
command before and after docking and there are differences. Is this causing me the problem?
Without docking and the external monitor connected directly to the laptop:
$ xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 32767 x 32767
eDP1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm
1920x1080 60.1*+ 59.9
1680x1050 60.0 59.9
1600x1024 60.2
1400x1050 60.0
1280x1024 60.0
1440x900 59.9
1280x960 60.0
1360x768 59.8 60.0
1152x864 60.0
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 connected (normal left inverted right x axis y axis)
1920x1200 60.0 +
1680x1050 60.0
1600x900 60.0
1280x1024 60.0
1440x900 59.9
When docked, the external monitor is connected through the docking station:
$ xrandr
Screen 0: minimum 320 x 200, current 3840 x 1200, maximum 32767 x 32767
eDP1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm
1920x1080 60.1*+ 59.9
1680x1050 60.0 59.9
1600x1024 60.2
1400x1050 60.0
1280x1024 60.0
1440x900 59.9
1280x960 60.0
1360x768 59.8 60.0
1152x864 60.0
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 disconnected 1920x1200+1920+0 (normal left inverted right x axis y axis) 0mm x 0mm
DP1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
DP2 connected (normal left inverted right x axis y axis)
1920x1200 60.0 +
1920x1080 60.0
1680x1050 60.0
1600x900 60.0
1280x1024 60.0
1440x900 59.9
1280x800 59.8
1280x720 60.0
1024x768 60.0
800x600 60.3 56.2
640x480 60.0
HDMI2 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
If I try to run this command:
xrandr --auto --output DP2 --mode 1920x1200 && xrandr --auto --output eDP1 --mode 1920x1080 --left-of DP2
The screen freezes again and I have to switch off the laptop. Any suggestions?