1
The system is an Advent 5301 laptop, and I'm trying to swap the hard drive for one of a larger capacity (120 -> 320 GB). I used Clonezilla to directly copy the original drive to the target drive, but when I try to boot from the target drive I get a blank screen or a BSOD after the Windows Vista green loading bars. The system restarts too quickly to read the BSOD message.
I can boot into safe mode; I booted with networking enabled to check for a driver for the new hard drive. Windows couldn't find an updated driver, and is convinced that the current driver is up to date.
The original hard drive was running in IDE mode, and the target drive was previously running in AHCI. However, I assumed that the BIOS would apply the correct setting on boot and if this was incorrect, it wouldn't get to the Vista loading screen? OR is this a driver thing, applied once Windows has booted, which would explain why safe mode works but normal boot doesn't?
If I press F8 on boot, and select "Repair your computer", I get a blank screen and the laptop reboots. I don't currently have access to a repair disc, but I could get one if necessary.
One last observation: when the laptop hangs on the blank screens, the hard disk activity light blinks once a second or so, and it sounds like the hard drive is powering on/off repeatedly. I noticed the original hard drive draws 1A while the target drive draws 1.55A - could this be an issue?
Any help on this is much appreciated!
Thanks for all the answers! I won't be able to try anything out until I'm back home, but I'll keep you posted. – TheTurkey – 2014-04-16T11:10:41.713