Just a caveat - keep yourself safe. Electricity can kill - easily. If you want to turn it into a heater, those CPU can easily get hot enough to catch fire. Especially if there's no automatic overheating safety mechanism, which there won't be. If in doubt, leave it alone. Safety lesson over and on to the fun part-
The pin configuration for 940 pin AMD sockets-
http://support.amd.com/TechDocs/31412.pdf
The AM2 socket design specifications-
http://support.amd.com/TechDocs/31875.pdf
I realise you're after AM2+, but considering the AM2+ CPUs work in AM2 motherboards (and vice versa) I can't imagine the pin configurations would be different.
Wikipedia http://en.wikipedia.org/wiki/Socket_AM2%2B suggests two things:
1) "The main differences between Socket AM2 and AM2+ socket processors are as follows:
HyperTransport 3.0 operating at up to 2.6 GHz
Split power planes: one for the CPU cores, and the other for the Integrated Memory controller (IMC). This will improve power savings, especially with integrated graphics, if the CPU cores are in sleep mode but the IMC is still active."
If true, then the voltage and ground pins will remain the same.
2) "While technical documentation was readily available for earlier generations of AMD processor sockets, the "AM2r2 Processor Functional Data Sheet" (AMD document number 41607) has not been made publicly available."
However, no source is given for either of these.
If the CPU is dead, there's no harm trying any pins you feel like, really...
Hope this helps!
Why do you need pinout for a CPU? – gronostaj – 2014-03-28T21:36:59.023
So after a little more searching I found these two PDFs, but neither has the information I need. You'll notice that the second one talks about the AM2 socket; but I couldn't find a similar sheet for the AM2+.
– evamvid – 2014-03-28T21:38:02.997@gronostaj I'm trying to put power through it to generate heat. See this Instructables and this video
– evamvid – 2014-03-28T21:39:30.060