0
I want to upgrade from openSuSE 12.2 to 12.3.
Therefore I have burned a ISO file of the openSuSE 12.3 distribution (32bit). To be precise I did this twice since I wondered, that this process resulted in a 4.2 G File Is this wrong - is this correct!?
Well since the first download also ended up in a 4,2 G file I just downloaded another file - also 4.2 G. What is wrong here!?
Attached the K3B burning protocol - I took the header and the footer.
What do you say - is this all correct?
Can I continue in my upgrade process well? I guess no. I have to tell the notebook that it have to boot from the DVD. But - how do I do that!?
Devices
-----------------------
TEAC DV-W28S-R S.0B (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R doppelschichtig, DVD+R, DVD+RW, DVD+R doppelschichtig) [DVD-ROM, DVD-R sequenziell, Zweischichtige DVD-R sequenziell, Zweischicht-DVD-R-Sprung, DVD-RAM, DVD-RW Eingeschränktes Überbrennen, DVD-RW sequenziell, DVD+RW, DVD+R, Zweischichtige DVD+R, CD-ROM, CD-R, CD-RW] [SAO, TAO, SAO/R96P, SAO/R96R, Eingeschränktes Überschreiben, Sprung zwischen DVD-Schichten] [%7]
K3b::DataTrackReader
-----------------------
reading sectors 0 to 2213887 with sector size 2048. Length: 2213888 sectors, 4534042624 bytes.
using buffer size of 128 blocks.
Read a total of 2213888 sectors (4534042624 bytes)
System
-----------------------
K3b Version: 2.0.2
KDE Version: 4.8.5 (4.8.5) "release 2"
QT Version: 4.8.1
Kernel: 3.4.33-2.24-desktop
Used versions
-----------------------
cdrecord: 1.1.11
cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'TEAC '
Identification : 'DV-W28S-R '
Revision : 'S.0B'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0011 (DVD-R sequential recording)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0002 (Removable disk)
Profile: 0x0011 (DVD-R sequential recording) (current)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1605632 = 1568 KB
FIFO size : 12582912 = 12288 KB
Speed set to 11080 KB/s
Track 01: data 4324 MB
Total size: 4965 MB (491:58.50) = 2213888 sectors
Lout start: 4966 MB (492:00/38) = 2213888 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 84608
Starting to write CD/DVD at speed 8.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Starting new track at sector: 0
Track 01: 0 of 4324 MB written.
Track 01: 1 of 4324 MB written (fifo 96%) [buf 67%] 27.3x.
Track 01: 2 of 4324 MB written (fifo 99%) [buf 93%] 0.0x.
Track 01: 3 of 4324 MB written (fifo 100%) [buf 89%] 1.0x.
Track 01: 4 of 4324 MB written (fifo 100%) [buf 89%] 2.1x.
Track 01: 96 of 4324 MB written (fifo 98%) [buf 99%] 2.4x.
Track 01: 97 of 4324 MB written (fifo 98%) [buf 99%] 2.0x.
Track 01: 98 of 4324 MB written (fifo 99%) [buf 93%] 2.0x.
Track 01: 99 of 4324 MB written (fifo 99%) [buf 93%] 2.0x.
Track 01: 4323 of 4324 MB written (fifo 100%) [buf 58%] 5.2x.
Track 01: 4324 of 4324 MB written (fifo 100%) [buf 100%] 8.7x.
Track 01: Total bytes read/written: 4534042624/4534042624 (2213888 sectors).
Writing time: 818.772s
Average write speed 4.1x.
Min drive buffer fill was 55%
Fixating...
Fixating time: 20.115s
/usr/bin/wodim: fifo had 71416 puts and 71416 gets.
/usr/bin/wodim: fifo was 0 times empty and 11126 times full, min fill was 58%.
cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=8 -sao driveropts=burnfree -data -tsize=2213888s -
zero
Posted 2013-05-11T11:23:33.350
Reputation: 291
I tried to straighten your question, however some points remain unclear to me: You downloaded 2 times and burned 2 times, right? What makes you think that something is wrong? And please don't include multiple questions in one. If you can't boot from your DVD drive, raise a seperate question providing more informations about your setup, but please use the search function before. – mpy – 2013-05-11T12:05:42.567