Accessing a Macbook Pro in Target Disk mode over Thunderbolt from Windows

4

I have a MacBook Pro late 2011 with Thunderbolt booted into Target Disk Mode, as well as a Gigabyte motherboard model number GA-Z77X-UP4 TH running Windows 7. The MBP has two internal disks formatted for Mac OS X. The two are connected via a Thunderbolt cable - not a displayport cable (though I did try that).

I am trying to access the internal disks' partitions of the MBP from Windows Explorer, though currently they do not show up.

Things I have already done:

  • Installed drivers on the Windows side (MacDrive 9)
  • Installed the chipset drivers from the Gigabyte product site
    • Intel IME
    • Intel IMF
  • Procured an Apple Thunderbolt cable
  • Formatted a portion of one of the two internal disks in FAT and NTFS

Does anyone have any suggestions on what to do next?

zwerdlds

Posted 2013-01-15T06:29:32.263

Reputation: 91

Answers

0

There's another Windows utility you can try: HFS Explorer. If that doesn't work, I would recommend that you try the Apple Thunderbolt to Firewire 800 adapter, which you can purchase for $30 from Apple, and then making a Firewire connection between the two computers.

What do you see on your computer when you plug the mac in? Does it display a notification that it's trying to install device drivers? Does anything show up in the device manager?

--edit--

After the long comment thread below, I would like to take a moment to summarize the findings. In order for Target Disk mode over Thunderbolt to work, two conditions must be met:

1) The computer in target disk mode must be a mac. 2) The other computer must be a Mac computer running Mac OS

Note: the second condition means that the second computer must be an Apple-made computer. It cannot be a hackintosh. The computer must also be running Mac OS and will not work in Bootcamp. Source for the last point: this thread

Alex Plumb

Posted 2013-01-15T06:29:32.263

Reputation: 1 616

I have a couple Thunderbolt -> Firewire adapters at work. I can check for you on Monday if this setup works. – Alex Plumb – 2013-01-20T03:25:21.980

I checked three different permutations this morning:

  1. Thunderbolt to Thunderbolt
  2. Thunderbolt to Firewire
  3. Firewire to Firewire

Of those, only #3 worked. It was also the only option that had any device drivers install or try to install. This was under a Sandy Bridge iMac running Windows 7. The Target Disk iMac was another Sandy Bridge iMac. – Alex Plumb – 2013-01-21T13:21:28.213

Another thing I'm really curious about is whether you can access a Target Disk mac as part of a thunderbolt daisy chain. For instance, you connect the target disk mac to a cinema display or a pegasus/lacie device and then to the windows computer. Would it work then? Alternatively, if you're looking for speed, you could get a thunderbolt hub and put your VMs on that. Another suggestion if you're looking for more speed than Firewire 800 is to connect both devices to a gigabit ethernet network. – Alex Plumb – 2013-01-22T16:49:51.273

I've edited my answer above to include our findings as well as some additional research that I've performed. – Alex Plumb – 2013-01-24T16:56:02.350

Asked: 2013-01-15T06:29:32.263

Viewed: 2 863 times

Active: 2020-02-09T06:00:55.140