It looks like I had the same problem and may very well have the solution for you.
First remark (on RDP):
This is disabled by default on Windows 7 and should of course be enabled (computer advanced settings).
Some other remarks (mainly for Pratyush and Bob):
I Assume that someone knowing about a command like "ping" and RDP will not be so ignorant to use the wrong IP address to connect to and will probably also have checked the firewall settings on both sides.
Neither DHCP or sharing would be the most likely cause for a problem like this. Ping and RDP are have in itself nothing to do with sharing (i.e. in firewall settings). A computer can have working shares for everyone on the network and still not answer to ping or RDP requests.
Also the connection type (Private, Work, Domain or Public) should not make any difference, once the firewall settings allow all ICMP and RDP traffic or the firewall is switched off an in case of a domain network group policies causing this problem can be excluded. The function of those connection types differences are mainly to allow security flexibility between the different networks. You would of course want more stringent security settings for public networks than for private or work/domain networks. By (automatically) detecting the right kind of network things can be made a lot easier for those wo change location/network a lot.
Now to the solution. I have been deducting what the most likely cause would be, since - as a rule of thumb, and to my 52 year life experience - the most likely cause of something is not the "most likely" by chance. Quite often it IS the cause, so it is best to check that first.
I have a network wit a few Windows 2003 and Windows 2008 servers, one Desktop Windows 7 all on UTP-LAN, and 3 Windows 7 laptops that I can connect to WLAN and/or UTP LAN.
The symptoms that I encountered with Two laptops, both on WLAN
Network and internet traffic on both WLAN connected laptops worked fine (DHCP, DNS, routing, ping to router or internet etc.: no problem)
First I checked the correct IP addresses for the WLAN connections on the laptop(s) (DHCP but reserved addresses), because they also have a possible UTP-connecion (wired that is).
ping or RDP connection between two WLAN clients connected to the network does not give a reply
ping or RDP connection to any UTP-LAN client connected to the network works normally
ping or RDP connection from any UTP-LAN client connected to one of those WLAN laptops works normally
I temporarily switched off the firewalls on both WLAN clients, just to be sure. But since the problem didn't occur to or from any UTP-connected clients this was actually pointless, so unsurprisingly on both WLAN laptops it gave the same results.
This obviously meant it was a problem only manifesting itself BETWEEN WLAN connected devices, having nothing to do with local firewall settings, and UTP LAN (cable) devices had no sign of this problem. The most likely cause could then hardly be any other than two things:
1. A group policy setting, that disallowed certain traffic on WLAN
2. The Wireless router blocking some network traffic
Since I checked Group Policy settings and those are not even applicable for those who don't run a Windows Domain environment and also have this problem, the second option became te most likely.
So I looked at the router WLAN settings and found a setting called "Intra-BSS traffic blocking" I have a ZyXEL P-2811HNU-F1 Wireless router/modem, but this may very well be switched on by default on other devices as well. I disabled this setting and all worked perfectly. Obviously this is a setting that blocks traffic between wireless clients and acts as an extra security for WLAN connected devices (much like a firewall) for otherwise unproteced devices. Think about WLAN printers, TV's or smart phones, who knows what firewall settings those kind of devices have???
P.S.: another possible (but not too likely) cause of this problem could be if the WLAN modem/router can be configured as a router between WLAN and (cable-/UTP-) LAN, having a different IP network range on WLAN tha on LAN. In that case there could be NAT (port forwarding), router setting errors or certain firewall settings at work that cause this problem.
Does the wireless network allow sharing? – pratnala – 2012-11-10T09:36:26.477
Where do we enable this? Is this some windows settings? I am using Windows 7. – noi.m – 2012-11-10T09:40:00.693
In network and sharing center when you're connected to the wireless network, does it say home network, work network or public network? – pratnala – 2012-11-10T11:08:47.630
it says Home network – noi.m – 2012-11-10T11:27:45.097
ok and which firewall are you using? – pratnala – 2012-11-10T11:28:33.143
i have put firewalls off on both machines, just for testing purpose. – noi.m – 2012-11-10T11:37:01.060
Now this is most weird – pratnala – 2012-11-10T11:37:52.137