13
5
I have two Radeon cards in this machine, a Radeon HD 6570 and a Radeon HD 6950:
lspci | grep VGA
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Turks [Radeon HD 6570]
02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Cayman PRO [Radeon HD 6950]
I'm trying to get VGA passthrough to work with KVM on Debian 7 (Wheezy), passing through the 6950 as a secondary video card to a Windows 7 guest. This works fine if I blacklist the radeon
kernel module via /etc/modprobe.d/
.
If I remove the blacklist to run X11 (or even just a KMS console) on the 6570 the radeon
module seems to attach to both cards:
dmesg | egrep "01:00.0|02:00.0|radeon"
pci 0000:01:00.0: [1002:6759] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 18: [mem 0xf7e20000-0xf7e3ffff 64bit]
pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 30: [mem 0xf7e00000-0xf7e1ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:02:00.0: [1002:6719] type 0 class 0x000300
pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 18: [mem 0xf7d20000-0xf7d3ffff 64bit]
pci 0000:02:00.0: reg 20: [io 0xd000-0xd0ff]
pci 0000:02:00.0: reg 30: [mem 0xf7d00000-0xf7d1ffff pref]
pci 0000:02:00.0: supports D1 D2
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: bridge control possible 0000:02:00.0
vgaarb: bridge control possible 0000:01:00.0
pci 0000:01:00.0: Boot video device
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: setting latency timer to 64
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
radeon 0000:01:00.0: irq 46 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
radeon 0000:01:00.0: WB enabled
[drm] radeon: ib pool ready.
[drm] radeon: power management initialized
fbcon: radeondrmfb (fb0) is primary device
fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
radeon 0000:02:00.0: enabling device (0000 -> 0003)
radeon 0000:02:00.0: setting latency timer to 64
radeon 0000:02:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:02:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
radeon 0000:02:00.0: irq 49 for MSI/MSI-X
radeon 0000:02:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
radeon 0000:02:00.0: WB enabled
[drm] radeon: ib pool ready.
[drm] radeon: power management initialized
fb1: radeondrmfb frame buffer device
[drm] Initialized radeon 2.12.0 20080528 for 0000:02:00.0 on minor 1
[drm] radeon: finishing device.
radeon 0000:02:00.0: ffff88041a941800 unpin not necessary
[drm] radeon: ttm finalized
pci-stub 0000:02:00.0: claimed by stub
pci-stub 0000:02:00.0: irq 49 for MSI/MSI-X
This causes the Windows 7 VM to bluescreen on boot.
How can I configure things so that module radeon
only attaches to the 6570 and not the 6950?
3The above didn't work for me. Instead I added
pci_stub.ids=1002:6719,1002:aa80
to end of the kernel command line in grub config file. I suspect the reason is thatpci-stub
module is built into the kernel in my setup. – Mansour – 2014-12-22T01:11:03.4671
Referenced in Multiheaded NVIDIA Gaming using Ubuntu 14.04 + KVM (step 2).
– Peter Mortensen – 2016-07-20T16:33:41.360