How to add drivers for Touch Monitor (Acer t231hb) and MK802

For the MK802, see the article How to re-install MK802 firmware that shows how to install (or reinstall) the firmware and from where. However, only the Rikomagic link worked for me for downloading LiveSuite and firmware Rev.1. If installing the latest firmware does not fix the problem, then it is probably caused by hardware.

For Android you will probably need to do some patch and recompile work on your kernel as described in Multitouch on Android, since the MK802 is not in the list of Available multitouch devices. As far as I understand from this article, this is easier for Android versions of at least 4.0 (Ice cream sandwich).

harrymc

Posted 2012-08-18T18:22:46.930

Reputation: 306 093

http://support.acer.com/product/default.aspx?modelId=1248 Its not a travelmate – Poul K. Sørensen – 2012-08-27T07:01:40.857

I have deleted my bad advice. Have you installed the driver on the monitor support page you linked to ? And on which operating system are you trying to make it work ? The only supported one is Windows, so I don't think there are any drivers for Android. – harrymc – 2012-08-27T08:04:32.617

.. I have added some words for Android. Hope this helps. – harrymc – 2012-08-27T08:41:51.980

The MK802 uses ICS. I have been using the monitor on windows for a long time. I just wanted to see if anyone could find a solution for it to work with this MK802 (Android device). Buy my next steps might be to install ubuntu and find out if a working solution exists there. – Poul K. Sørensen – 2012-08-27T13:02:21.057

Good assumption, so have you tried to locate these drivers? Do you have references suggesting that this will even work? What have you tried already? Where are you getting stuck? – Ƭᴇcʜιᴇ007 – 2012-08-18T20:20:30.140

I have only been searching google with no luck. – Poul K. Sørensen – 2012-08-23T20:10:53.143

How to add drivers for Touch Monitor (Acer t231hb) and MK802

Answers