Conversion from WMV to MP4 file fails with FFmpeg

When converting a WMV file to an MP4 file, it says

[mp4 @ 0x989c160] track 1: could not find tag, codec not currently supported in container

and

Could not write header for output file #0 (incorrect codec parameters ?): Operation not permitted.

But converting the WMV file to an MKV file is fine. Wonder why?

Following are the outputs of both cases.

Converting from the wmv file to a mp4 file is not working

$ ffmpeg -i "1.wmv" -c:v libx264 -crf 23 -c:a copy  "1.mp4" 
ffmpeg version git-2012-06-03-169dae8 Copyright (c) 2000-2012 the FFmpeg developers
  built on Jun  3 2012 09:14:54 with gcc 4.6.3
  configuration: --enable-gpl --enable-libfaac --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-nonfree --enable-version3 --enable-x11grab
  libavutil      51. 56.100 / 51. 56.100
  libavcodec     54. 23.100 / 54. 23.100
  libavformat    54.  6.101 / 54.  6.101
  libavdevice    54.  0.100 / 54.  0.100
  libavfilter     2. 77.100 /  2. 77.100
  libswscale      2.  1.100 /  2.  1.100
  libswresample   0. 15.100 /  0. 15.100
  libpostproc    52.  0.100 / 52.  0.100
Guessed Channel Layout for  Input Stream #0.0 : stereo
Input #0, asf, from '1.wmv':
  Metadata:
    WMFSDKVersion   : 9.00.00.3267
    WMFSDKNeeded    : 0.0.0.0000
    IsVBR           : 0
  Duration: 01:40:50.70, start: 0.000000, bitrate: 2100 kb/s
    Stream #0:0(eng): Audio: wmav2 (a[1][0][0] / 0x0161), 44100 Hz, stereo, s16, 128 kb/s
    Stream #0:1(eng): Video: wmv3 (Main) (WMV3 / 0x33564D57), yuv420p, 640x480, 1974 kb/s, 29.97 tbr, 1k tbn, 1k tbc
[buffer @ 0x98c28c0] w:640 h:480 pixfmt:yuv420p tb:1/1000 sar:0/1 sws_param:flags=2
[buffersink @ 0x9894320] No opaque field provided
[libx264 @ 0x98b0ec0] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.1 Cache64
[libx264 @ 0x98b0ec0] profile High, level 3.0
[libx264 @ 0x98b0ec0] 264 - core 125 r2200 999b753 - H.264/MPEG-4 AVC codec - Copyleft 2003-2012 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=3 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
[mp4 @ 0x989c160] track 1: could not find tag, codec not currently supported in container
Output #0, mp4, to '1.mp4':
  Metadata:
    WMFSDKVersion   : 9.00.00.3267
    WMFSDKNeeded    : 0.0.0.0000
    IsVBR           : 0
    encoder         : Lavf54.6.101
    Stream #0:0(eng): Video: h264 ([33][0][0][0] / 0x0021), yuv420p, 640x480, q=-1--1, 30k tbn, 29.97 tbc
    Stream #0:1(eng): Audio: wmav2 (a[1][0][0] / 0x0161), 44100 Hz, stereo, 128 kb/s
Stream mapping:
  Stream #0:1 -> #0:0 (wmv3 -> libx264)
  Stream #0:0 -> #0:1 (copy)
Could not write header for output file #0 (incorrect codec parameters ?): Operation not permitted

Converting from the wmv file to a mkv file is fine:

$ ffmpeg -i "1.wmv" -c:v libx264 -crf 23 -c:a copy  "1.mkv" 
ffmpeg version git-2012-06-03-169dae8 Copyright (c) 2000-2012 the FFmpeg developers
  built on Jun  3 2012 09:14:54 with gcc 4.6.3
  configuration: --enable-gpl --enable-libfaac --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-nonfree --enable-version3 --enable-x11grab
  libavutil      51. 56.100 / 51. 56.100
  libavcodec     54. 23.100 / 54. 23.100
  libavformat    54.  6.101 / 54.  6.101
  libavdevice    54.  0.100 / 54.  0.100
  libavfilter     2. 77.100 /  2. 77.100
  libswscale      2.  1.100 /  2.  1.100
  libswresample   0. 15.100 /  0. 15.100
  libpostproc    52.  0.100 / 52.  0.100
Guessed Channel Layout for  Input Stream #0.0 : stereo
Input #0, asf, from '1.wmv':
  Metadata:
    WMFSDKVersion   : 9.00.00.3267
    WMFSDKNeeded    : 0.0.0.0000
    IsVBR           : 0
  Duration: 01:40:50.70, start: 0.000000, bitrate: 2100 kb/s
    Stream #0:0(eng): Audio: wmav2 (a[1][0][0] / 0x0161), 44100 Hz, stereo, s16, 128 kb/s
    Stream #0:1(eng): Video: wmv3 (Main) (WMV3 / 0x33564D57), yuv420p, 640x480, 1974 kb/s, 29.97 tbr, 1k tbn, 1k tbc
File '1.mkv' already exists. Overwrite ? [y/N] y
w:640 h:480 pixfmt:yuv420p tb:1/1000 sar:0/1 sws_param:flags=2
[buffersink @ 0xa0a2760] No opaque field provided
[libx264 @ 0xa0b6ec0] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.1 Cache64
[libx264 @ 0xa0b6ec0] profile High, level 3.0
[libx264 @ 0xa0b6ec0] 264 - core 125 r2200 999b753 - H.264/MPEG-4 AVC codec - Copyleft 2003-2012 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=3 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00
Output #0, matroska, to '1.mkv':
  Metadata:
    WMFSDKVersion   : 9.00.00.3267
    WMFSDKNeeded    : 0.0.0.0000
    IsVBR           : 0
    encoder         : Lavf54.6.101
    Stream #0:0(eng): Video: h264, yuv420p, 640x480, q=-1--1, 1k tbn, 29.97 tbc
    Stream #0:1(eng): Audio: wmav2 (a[1][0][0] / 0x0161), 44100 Hz, stereo, 128 kb/s
Stream mapping:
  Stream #0:1 -> #0:0 (wmv3 -> libx264)
  Stream #0:0 -> #0:1 (copy)
Press [q] to stop, [?] for help
frame=  325 fps=106 q=29.0 size=     411kB time=00:00:09.20 bitrate= 366.0kbits/s

Tim

Posted 2012-06-04T10:52:47.510

Reputation: 12 647

Answers

codec not currently supported in container

That's your error.

Try specifying another audio codec like with -c:a libfaac. MP4 doesn't take Windows Media Audio in its container. You have to choose a matching audio codec, like AAC. Right now all you do is try to copy the bitstream, and that fails – as indicated by the error message.

The same problem of non-matching codecs goes for other containers, although MKV is way more open to other codecs than MP4 is, therefore you can use almost any codecs within an MKV container. This does not work for MP4.

In general though, for maximum compatibility, try to stick to the most common formats for containers, e.g.

AVI: MPEG-4 video, MP3 audio
WMV: Windows Media Video and Audio
MKV, MOV, MP4: h.264, AAC audio (although MKV really takes anything, here the limitation is on the playback device side)

slhck

Posted 2012-06-04T10:52:47.510

Reputation: 182 472

Thanks! (1) HOw do you know it is for audio codec not video codec? (2) if specify -c:a libfaac, what bitrate is recommended for it? – Tim – 2012-06-04T11:14:57.750

As for bitrate, use whatever you like. I'm sure -b:a 192k should be enough. – slhck – 2012-06-04T11:18:02.933

@Tim: yes, it is the audiocodec, that is wrong for the mp4-container: see here http://git.videolan.org/?p=ffmpeg.git%3Ba=blob%3Bf=libavformat/movenc.c%3Bh=54deef4177262e4da943f6b306c01fbff1a9d29f%3Bhb=HEAD#l3475 and libavformat starts counting at 0 for the tracks http://git.videolan.org/?p=ffmpeg.git%3Ba=blob%3Bf=libavformat/movenc.c%3Bh=54deef4177262e4da943f6b306c01fbff1a9d29f%3Bhb=HEAD#l3230

– akira – 2012-06-04T11:22:02.817

@akira: Thanks! (1) How do you know it is not video codec? (2) You mean me to see .audio_codec = CODEC_ID_AAC, in your first link? WHat does it say for my questions? – Tim – 2012-06-04T11:25:30.670

1@Tim: 1) because both link refer to the TRUTH .. aka the code. the first link setup what ffmpeg accepts for codecs for the mp4-container: aac for audio and either libx264 or ffmpeg-mpeg4 for video. the second link shows you the place of the code that generates the error-message your are seeing, scroll a few lines back and you see how ffmpeg starts counting at 0. since your are using libx264 as the video-codec and thus fullfill the requirement for the video-codec the only logical conclusion left is: you are using the wrong audio-codec (wma2 in your case instead of aac) – akira – 2012-06-04T11:33:59.117

you can also see how ffmpeg/avconv (new name) which tracks are what in the output-container: Stream mapping: Stream #0:1 -> #0:0 (wmv3 -> libx264) Stream #0:0 -> #0:1 (copy) ... #0:1 .. that is the track 1, the 0-track is the video-track. – akira – 2012-06-04T11:45:03.810

@akira: Are you saying avconv is a supersede of ffmpeg? So ffmpeg is no longer under development? – Tim – 2012-06-04T12:59:30.707

@Tim No, that's not true. Libav (which has the avconv binary) is just a fork. They more or less share the same code. FFmpeg is still under active development. – slhck – 2012-06-04T13:20:12.857

@Tim: no, i didn't say that. it's just that 'avconv' is a rewritten 'version' of the 'ffmpeg'-tool itself, under the (forked from the 'ffmpeg'-project') umbrella of 'libav'. but completely irrelevant to your problem, accept slhck's answer because it is the answer. – akira – 2012-06-04T13:50:56.787

@slhck: i would take "mkv" out of your "common codecs" section, mkv just eats everything. "webm" would fit better there and "mov" and "mp4" are correct, imho. but "mkv" just eats everything. – akira – 2012-06-04T13:52:33.933

@akira: What does ""mkv" just eats everything" mean? – Tim – 2012-06-04T14:49:14.300

@slhck: After I finish converting the wmv file to kmv file, can I convert it to mp4 by ffmpeg -i 1.kmv -c:v copy -c:a libfaac -b:a 192k 1.mp4? Is it much faster because there is no decoding and coding for the video part, and only there is for the audio part? – Tim – 2012-06-04T14:58:26.410

@Tim Exactly – if you copy the video stream, you won't encode, therefore the command is much faster. And yes, MKV will be able to use any codec you feed to it, not like MP4 which has lots restrictions. See: Comparison of container formats

– slhck – 2012-06-04T14:59:55.477

@Tim: if you want to end up with a valid .mp4 then it is not faster to encode the video and audio in seperate steps. just do everything in one step: ffmpeg -i input.wmv -c:v libx264 -crf 23 -c:a libfaac -b:a 192k out.mp4. end of story. the chatter about what you can store inside a .mkv is irrelevant for your problem when you want to end up with a valid .mp4. – akira – 2012-06-04T15:12:30.353

@Tim As for bitrate with libfaac you can alternatively use -q:a 100 (or any other desired value). This is similar to faac -q 100. – llogan – 2012-06-04T17:12:21.350

@LordNeckbeard: Does -q:a mean the quality of audio? What does -q:a 100 mean? THanks! – Tim – 2012-06-04T17:15:53.153

@Tim: Yes. See the -q option in man faac. – llogan – 2012-06-05T01:22:30.947

try just doing:

ffmpeg -y -i 1.wmv -b:v 2000k 1.mp4

ffmpeg should automatically pick the most appropriate audio format and use libx264 for the video, the 2000k is essentially telling it to encode at the same bitrate as the original video file.

Justin Buser

Posted 2012-06-04T10:52:47.510

Reputation: 1 147

Actually, by default ffmpeg uses MPEG4 for video in an MP4, so you'd have to specify -c:v libx264 – evilsoup – 2013-04-16T14:35:58.540