1
The LCD screen on my Brother DCP 145c printer shows a message
clean unable 46
I changed cartridges and the printer does not respond on pressing the buttons. What shall I do?
1
The LCD screen on my Brother DCP 145c printer shows a message
clean unable 46
I changed cartridges and the printer does not respond on pressing the buttons. What shall I do?
1
Try to reset it
Press the Menu, then Mono Start key then press the UP arrow key 4 times to make the machine enter the maintenance mode and “ERROR 46″ pops-up in the display.
Enter maintenance mode 80: Select 8 by pressing the UP/DOWN arrow key and push OK key and select 0 and push OK key
Now Press MONO arrow key several times until you see PURGE:XXXXX
Select 2 and push OK, Select 7 and push OK, 8 and push OK, select 3 and push OK and the purge counter is now reset to 00000.
Press STOP/EXIT key to go to root of maintenance mode
Enter code 99 to exit maintenance mode: Select 9 and push OK, Select 9 and push OK.
0
according to Brother website error code listing
error code 46 refers to "ink absorber pad is full and needs replacing."
You will need to bring it in for service