0
I need to setup a wireless IP camera (Trendnet TV-IP501W) on my network so that it is remotely visible from anywhere. Right now I successfully connected it to my home network but nothing else. My router is a Belkin N450 DB.
Any help would be much appreciated, including what this would be referred to as so I could more easily ask another forum. I believe it is something like "port forwarding" but I'm not sure.
Ok, I believe I found this in the "virtual servers" section. It asks for enabling with a check box, description, inbound port, type, private IP, & private port. In that order I have checked enabling, "camera", 150, TCP, 81, and 81? I'm assuming inbound ports are the numbers I use for the home network - xxx.xxx.x.150 and the 81 was for private.
I used my WAN IP and added :81 and .81 but didn't get it. What am I doing wrong?
Ok, I believe I found this in the "virtual servers" section. It asks for enabling with a check box, description, inbound port, type, private IP, & private port. In that order I have checked enabling, "camera", 150, TCP, 81, and 81? I'm assuming inbound ports are the numbers I use for the home network - xxx.xxx.x.150 and the 81 was for private.
I used my WAN IP and added :81 and .81 but didn't get it. What am I doing wrong?
1
Mike, we reset the ownership of this post to your account, so you can now [edit] it to add more information. You should register your account permanently so that in the future, you will always have access to your questions no matter where you log in from.
– nhinkle – 2012-02-21T22:44:58.043