1
I have an ASRock K7S41GX motherboard.
I don't know where to plug in the power switch.
unleash
Posted 2011-12-04T10:34:41.263
Reputation: 13
Where to plug in the PowerSwitch on an ASRock K7S41GX motherboard
Answers
0
Have a look at page 20 on your manual - http://download.asrock.com/manual/K7S41GX%20Pro.pdf
You should see this: 
Connect your power switch to "PWRBNT" and the "GND" pin next to that and it should work.
This connector is at the bottom right of your motherboard.
iTom
Posted 2011-12-04T10:34:41.263
Reputation: 545
many thanks - look forward to try it out!! I come back and report all my findings Greetings – unleash – 2011-12-04T12:51:07.837
additional question: well i have a plug where two cables are in - a red one and a white one. How should i set this onto the corresponding connector? I do not know - Shcould i assume that white means ground and red is + 5 volt. I have no voltmeter here. I cannot make tests. can anybody advice here=? look forward to hear from you !! Grretings – unleash – 2011-12-04T20:39:35.253
If this is just a power switch it doesn't really matter most of the time, as it will work either way. It would only matter if it's something like a LED light, try one way then the other. Although I would guess red is the power, and white is the ground. – iTom – 2011-12-04T21:38:30.690
many thx. I will do so!! – unleash – 2011-12-05T05:03:11.530