How to enable NAT Port Mapping on an Airport Extreme

2

I'm trying to configure my Aiport Extreme so that it uses NAT Port Mapping. I tried following the instructions on http://support.herefilefile.com/entries/158222-enable-nat-port-mapping-protocol-on-airport-extreme.

In Airport Utility (version 5.5.3) however the two tabs DHCP and NAT seem to be missing. enter image description here

How can I enable the NAT tab so I can enable NAT Port Mapping?

murze

Posted 2011-10-12T21:58:30.153

Reputation: 171

Murze, What other routers or time capsules do you have on this network? This can happen if other devices on the network are in bridge mode. – bg2011 – 2011-10-13T12:05:48.243

bg2011, thanks for your comment, i saw that the airport itself was in bridge mode. Turned it off and the tabs appeared! – murze – 2011-10-14T13:22:13.627

Answers

1

The solution was to turn off bridge mode.

murze

Posted 2011-10-12T21:58:30.153

Reputation: 171

Asked: 2011-10-12T21:58:30.153

Viewed: 1 908 times

Active: 2011-10-14T13:22:38.290