1
1
I am trying to upgrade the 250GB hard drive in my MacBook Pro (early 2008 model) to a 750GB drive. I have connected the new drive via an external USB enclosure. The drive is recognized fine, I can format it, etc.
However, every time I try to clone the drive, I am getting Input/Output errors. Before the clone operation, I have verified both the internal and the external drive using Disk Utility, and they both check out fine. After the clone operation, the external drive shows multiple "Invalid node structure" errors:
I have tried two approaches for cloning the drive:
- Using Disk Utility, by starting from the OSX install DVD
- Using Carbon Copy Cloner
The outcome is the same in both cases.
The Carbon Copy Cloner logs show a handful of the following types of errors:
rsync: mkstemp "<... an external filename ...>" failed: Input/output error (5)
rsync: stat "<... an external filename ...>" failed: Input/output error (5)
The actual files affected seem to be different across different runs of the application.
Before the last run, I used Disk Utility to (once more) reformat the external drive and explicitly overwrite it with zeros, but this made no difference.
I also tried running a surface scan in Tech Tool Pro overnight. It got about 2/3 of the way through before I had to disconnect the drive (had to take my MacBook Pro to work), but so far it didn't report any bad blocks. Assuming it scans the drive in the same order in which blocks would be allocated during actual use, it seems like if bad blocks were to blame for the clone failures, they should have been found already (given that the source drive is only 250GB).
As a last attempt, I may try SuperDuper as well, although my understanding is that it uses the same underlying rsync approach as Carbon Copy Cloner, so it's unlikely to perform any better.
Are there any other things I should try before I send the drive in for a replacement? Could these problems be caused by my internal drive, even though it works fine and checks out fine in Disk Utility?
Thanks for the feedback! I bought the drive from Amazon last week, so replacing it should be painless. I'll do that first, and then will definitely try again with Carbon Copy Cloner. – Mirko Froehlich – 2011-03-18T16:20:38.760
Sure enough, getting a new drive fixed the problem. I cloned it with Carbon Copy Cloner and it works beautifully. :) – Mirko Froehlich – 2011-03-21T14:29:51.680