0
I want to work from home. My office computer is connected to an internal LAN and it doesn't have any publicly accessible IP address.
There is one server which is both publicly available as well as connected to the internal LAN.
When I want to connect to my computer, I Remote Desktop to the server and then inside that I Remote Desktop to my computer. This makes it awfully slow.
Is there a way I can connect directly to my computer?
This is a small office and I have all the rights to the server. I've heard there are ways of opening up some port and then remote desktop-ing directly to an internal LAN computer.
Thanks
I like the Port opening option. How does it work? Can you point out a tutorial/step by step guide? Thanks. – neebz – 2010-08-24T14:59:09.710
I wouldn't recommend it but - configuring port forwarding is usually specific to the router. Remote desktop works on port 3389. You tell your router to direct all internet traffic on a specific port to your internal IP at port 3389. You then connect to the chosen external port. Google 'remote desktop port forwarding'.
How do you remote desktop to the server now? – Ajw – 2010-08-24T15:44:22.443
Thats the point. There is no router involved. I just need to somehow port forward on windows server. I think it'll be much easier but I can't find a way. Not even on google. There must be some option in Control Panel somewhere. – neebz – 2010-08-24T15:46:49.387
Are you sure there's no router? Do the other computers on your LAN have access to the Internet? Also, assuming you're able to figure out how to forward port 3389 to your office computer, this will make it impossible to remote into your server. The solution, which also improves security, is to configure the RDP service on your office computer to use a different port.
– boot13 – 2010-08-24T16:06:48.5201@Muneeb Are you saying that the server is dual-homed, i.e. has a WAN interface with public IP address and a LAN interface? In that case, are you using ISA or RRAS to route between the two? – Ajw – 2010-08-25T00:56:36.317
umm..i think it's getting slightly confusing. Consider, My office server is www.myoffice.com. I remotely desktop to it easily. It's on the same LAN as of my own work computer. Is it possible if I remote desktop to lets say www.myoffice.com:1234 I get to remote desktop my own work computer? Isn't this port forwarding all about? sorry if i am sounding dumb. – neebz – 2010-08-25T21:53:52.043
1@Muneeb You say you have no router. That means your server must be acting as a router. This would be probably done with ISA Server or Routing & Remote Access Services (RRAS). You can configure port forwarding using 1 of them. – Ajw – 2010-08-26T02:47:14.403